Steel Motorcycle Wheel Chock with Drive-in Lock Steel Motorcycle Wheel Chock with Drive-in Lock
Buyers Steel Motorcycle Wheel Chock with Drive-in Lock # BYWC151013 $116.95
Mounts firmly to truck beds, trailers, and garage floors. Drive-in wheel lock makes securing your vehicle quick and easy. Ideal solution for storing or transporting your motorcycle or moped. Fits 17 in. to 21 in. wheels with tires up to 5-1/2 in. wide. Black powder-coated finish for corrosion resistance. Buyers Products Black Powder-Coated Steel Motorcycle Wheel Chock mounts to the floor of a truck bed, trailer, or garage to provide a front tie-down point for motorcycle storage and transport. The drive-in wheel lock makes securing your bike quick and easy. Each chock is constructed from durable 3/4 in. steel tubing with welded braces and a black powder coat finish for corrosion resistance. The tapered chock fits 17 in. to 21 in. wheels with tires up to 5-1/2 in. wide. Product Common Use: Motorcycles, Moped, Motor Scooters, Garage Storage
Trailer-Only Motorcycle Chock/Lock Motorcycle Chock Condor Trailer-Only Motorcycle Chock/Lock Motorcycle Chock Condor
Condor Trailer-Only Motorcycle Chock/Lock # SC-2000 $359.99
The CONDOR® SC-2000 Trailer-Only Chock is our all-steel version of our Pit-Stop. It has all the same capabilities except it is designed for trailer use only.  Our patented adjustable cradle fits all bikes from dirt bikes and sport bikes, to cruisers and heavy touring bikes, and anything in between, up to 3,000 lbs.  It will work on front and rear tires from 14" to 22" and 80mm to 230mm.  The patented locking mechanism safely and securely supports your motorcycle in an upright position on all transportation platforms. Our chock will hold your motorcycle so securely, only one person is needed to load and unload any bike, and only two tie-down straps are usually required. And you won't damage your sensitive suspension parts because you never need to over-tighten your tie-down straps.  The Trailer-Only chock attaches and detaches to your trailer in seconds with four thumb screws.  You will be amazed at how secure and safe your ride will be once tied down in the CONDOR® wheel chock. The SC-2000 comes complete with all brackets and hardware to mount this unit to your trailer.  The CONDOR® SC-2000  folds down for easy storage and weighs only 26+ lbs. Its dimensions in the upright position are 9” wide, 25” long and 15” high. Once folded, it becomes 9” wide, 25” long and 7” high. If you don't require the free-standing versatility of the Pit-Stop, the Trailer-Only model is the way to go. Condor also offers a Chopper Chock Cradle in sizes 120mm, 130mm, 140mm and 150mm for bikes with low slung hugger fenders.  (see Related Products, below) This is also the perfect wheel chock to attach to your lift table to keep any bike stable while working on it, and it can also extend your lift table by 10".
Condor Pit-Stop/Trailer-Stop with Trailer Adapter Kit Motorcycle Chock Condor Condor Pit-Stop/Trailer-Stop with Trailer Adapter Kit Motorcycle Chock Condor
Condor Condor Pit-Stop/Trailer-Stop with Trailer Adapter Kit # PSTK-6400 $460.00
This fully adjustable wheel locking system is capable of accommodating either front or rear wheels in sizes from 15-22in or 80-220 mm wide. The patented locking mechanism securely supports your motorcycle in an upright position on any type of flat surface or transport platform. The Pit Stop also serves as a Trailer Stop with the optional Trailer Adapter Kit, which allows quick attaching or detaching. Requires only one person to load or release any motorcycle and in most cases, 2 tie-down straps are required to secure the bike for transport.
B&W Biker Bar Motorcycle Tie-Down System B&W Biker Bar Motorcycle Tie-Down System
B&W Trailer Hitches B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 from $559.99
Load and unload your Harley Davidson in less than a minute by yourself with the Biker Bar. Drive over steep, pitched terrain with your bike securely latched. Adjustable clamping bar with neoprene lined clamps prevents scratches. Always remove clamping bar when not trailering. Your motorcycle's suspension is not stressed. When the rider dismounts, the bike's suspension system remains slightly compressed, exerting just the right amount of upward pressure to maintain rigid stability without stressing the suspension components. A bike secured with a Biker Bar becomes an extension of the trailer’s suspension system, instead of amplifying it as an active bike suspension system would. Let your trailer suspension do the work. Latching system easily unbolts from the trailer without crawling underneath, freeing up your trailer for other things. Can be mounted in your garage for safely storing your bike. Works with all Harley Davidson motorcycles with factory painted frames. Six 1/4" increments of vertical adjustment to accommodate different motorcycle models.   Fitting The Biker Bar To Different Motorcycles Biker Bar Installation Instructions Biker Bar Model Chart
Motorcycle Garage Dolly Motorcycle Chock Condor Motorcycle Garage Dolly Motorcycle Chock Condor
Condor Motorcycle Garage Dolly # GD-3500 $1,199.99
Meet the New Expandable CONDOR Motorcycle Garage Dolly Simply push any motorcycle onto the Garage Dolly, and into our CONDOR Wheel Chock, with its patented adjustable cradle that accommodates every type of motorcycle, from heavy cruisers and touring bikes, to sport bikes and dirt bikes, with wheel sizes from 13" to 30." Now your bike is secured in an upright position, and is ready to be easily rolled, or swiveled anywhere you wish in your garage to save space when storing, servicing, or detailing it, or just to keep it safe and out of harm's way.   The Garage Dolly rides on sturdy 4-inch wheels, so it will roll or swivel easily, and will even navigate cracks, crevices, and pitted garage floors. The Dolly is made from sturdy aluminum and steel and only weighs 68 lb. When not in use, it folds and can be mounted on a garage wall for storage. The Garage Dolly has a load rating of 1300 lb. It measures 90" long (expandable to 94") and has a deck dimension of 12" wide. It is 24" at its widest point at the wheel brackets. Four large twist -down brakes secure the unit from rolling when placing your bike into the Dolly, or removing it. The Garage Dolly includes a Velcro Security Strap (Part# VS-Black) Remember, the Garage Dolly is made by CONDOR, in America, so you know it's got to be good. And, like all of our products, it's Heart Healthy and Gluten Free!
Scooter Chock Motorcycle Chock Condor Scooter Chock Motorcycle Chock Condor
Condor Scooter Chock # SCC-4000 $299.95
The Universal E-Track Adaptor Kit (UNIV-E TRACK) is designed to be used with either a Condor Pit-Stop/Trailer-Stop, (PS-1500) the CONDOR Trailer-Only model (SC-2000), the CONDOR Scooter Chock (SCC-4000) and the Condor Chopper Chock (CHCK-1500). The kit allows our chocks to quickly and securely attach to the E-Track on any trailer platform, whether the E-Track is above the floor, recessed, or flush-mounted. Now you can adjust the position of the chock anywhere along the E-Track for maximum flexibility in positioning a motorcycle, and the chock can be adjusted side to side between the E-Track.  The minimum and maximum center-to-center distances between the mounted E-tracks are 26” and 46” respectively.  Keep in mind that if you are using our PS-1500 the minimum distance between the inside of the tracks is limited by the width of the PS-1500 which is 29”. The Universal E-Track Adaptor Kit comes will all the necessary hardware for assembly, including a Boomerang Bar for added stability to your CONDOR Chock. Also available is our new A-Track Adaptor Kit (A-TRACK KIT), sold separately. The A-Track Adaptor Kit contains all the necessary hardware to adapt our Universal E-Track Adaptor Kit for use with your floor-mounted A-Track. It will allow you to use any Condor Wheel Chock, and adjust its placement, fore and aft, or side to side, along your A-Track, for maximum flexibility in positioning your bike. You must purchase the Universal E-Track Adaptor Kit to use the A-track Adaptor Kit. Made of heavy duty plated steel. Ratchet tie-downs are required for transporting the motorcycle.U.S Patent 8,439,612 B2
Chopper Chock Motorcycle Chock Condor Chopper Chock Motorcycle Chock Condor
Condor Chopper Chock # CHCK-1500-90 $489.95
Adjusts to work with those new huge front wheels, up to 32-inches! **** Looking for a safe way to store or transport your chopper? We've got just what you are looking for.Our Chopper Chock is the first wheel chock specifically designed for the unique requirements of choppers.  Now any chopper can be held securely in an upright position in your garage or on any flat surface, or be transported in a trailer safely and securely with only two tie-down straps, and without damaging sensitive suspension parts, such as springs and fork seals. The Chopper Chock also works perfectly with those low-slung “hugger” front fenders, without fear of damage, because our unique chopper cradle is designed to touch only the sides of the tire and nothing else. Best of all, the Chopper Chock requires only one person to load and release the bike for transport, and with our quick-release Trailer Adaptor Kit (included), the whole chock can be installed or removed from the trailer in seconds. The Chopper Chock adds additional bracing for optimum stability for that long raked-out front fork.  You choose the right cradle for your tire, in either 90mm, 120mm, 130mm, 140mm, or 150mm.   The Chopper Chock adjusts to accommodate those new huge front wheels up to  32-inches! (**** The chock will accommodate a wheel up to 34", provided that the tire width does not exceed 130mm)  An Ultra Wide Tire Kit (PS UWCK) is also available if securing the chopper with the rear wheel is desired. The Chopper Chock is not only perfect for transporting the motorcycle, but it’s also perfect for use in a garage, or on any flat surface, to keep the chopper in a stable upright position for easy servicing or detailing, or just showing it off.Now that high dollar chopper can be protected from damage while trailering or just parked in the garage.
-9% sale
Universal E-Track Adapter Kit for Condor products Universal E-Track Adapter Kit for Condor products
Condor Universal E-Track Adapter Kit for Condor products # UNIV-ETRACK $225.99
$245.99
The Universal E-Track Adaptor Kit (UNIV-E TRACK) is designed to be used with either a Condor Pit-Stop/Trailer-Stop, (PS-1500) the CONDOR Trailer-Only model (SC-2000), the CONDOR Scooter Chock (SCC-4000) and the Condor Chopper Chock (CHCK-1500). The kit allows our chocks to quickly and securely attach to the E-Track on any trailer platform, whether the E-Track is above the floor, recessed, or flush-mounted. Now you can adjust the position of the chock anywhere along the E-Track for maximum flexibility in positioning a motorcycle, and the chock can be adjusted side to side between the E-Track.  The minimum and maximum center-to-center distances between the mounted E-tracks are 26” and 46” respectively.  Keep in mind that if you are using our PS-1500 the minimum distance between the inside of the tracks is limited by the width of the PS-1500 which is 29”. The Universal E-Track Adaptor Kit comes will all the necessary hardware for assembly, including a Boomerang Bar for added stability to your CONDOR Chock. Also available is our new A-Track Adaptor Kit (A-TRACK KIT), sold separately. The A-Track Adaptor Kit contains all the necessary hardware to adapt our Universal E-Track Adaptor Kit for use with your floor-mounted A-Track. It will allow you to use any Condor Wheel Chock, and adjust its placement, fore and aft, or side to side, along your A-Track, for maximum flexibility in positioning your bike. You must purchase the Universal E-Track Adaptor Kit to use the A-track Adaptor Kit. Made of heavy duty plated steel. Ratchet tie-downs are required for transporting the motorcycle.U.S Patent 8,439,612 B2
Condor TK-3000 Pit-Stop/Trailer-Stop Adapter Kit Motorcycle Chock Condor Condor TK-3000 Pit-Stop/Trailer-Stop Adapter Kit Motorcycle Chock Condor
Condor Condor TK-3000 Pit-Stop/Trailer-Stop Adapter Kit # TK-3000 $47.59
This Trailer Adaptor Kit is designed to work with our Pit Stop/Trailer Stop chock, (part # PS-1500). Simply mount the low profile kit to the floor of your trailer, and the Pit-Stop/Trailer-Stop wheel chock (PS-1500) is ready to be attached in seconds with eye bolts and only one thumb screw. Many customers get an extra one to easily change the placement of their motorcycle in their trailer.
Garage Dolly Trailer Kit Garage Dolly Trailer Kit
Condor Garage Dolly Trailer Kit # GD-TK3000 $85.95
CONDOR®’s Garage Dolly is now even more versatile! We’ve developed a Trailer Adapter Kit (Part# GD-TK-3000) so you can now use the Dolly to transport your motorcycle in a trailer. The kit contains two separate brackets that mount permanently to the floor of your trailer, one for the front of the Dolly, and another one for the rear of the Dolly. Once installed, simply attach the Garage Dolly to the Trailer Adapter Kit brackets, and ride or roll your bike into the Dolly. First, secure the motorcycle to the Dolly, and then use your tie-down straps to secure the Dolly to the trailer.Now you’re ready to transport your motorcycle safely and securely, just as you do with the Pit Stop Wheel Chock, the Trailer-Only model, or Chopper Chock.
ATV/UTV Tie-Down Strap Kit ATV/UTV Tie-Down Strap Kit
SuperClamps ATV/UTV Tie-Down Strap Kit # 9000ATV-UTV $179.95
From the makers of Superclamp, get the toughness and security that you’ve come to expect for your snowmobile for your ATV or UTV with this unique strap tie-down kit. Scroll over the hot spots above for full feature listing and benefits, view photos below, and shop online with Superclamp to get yours today! Comes complete with 4 straps, 4 deck hooks, and a storage bag. Each strap has a working load rating of 1,300 lbs
Heavy Duty Motorsports Ratchet Strap with Soft Ties Straps S-Line Heavy Duty Motorsports Ratchet Strap with Soft Ties Straps S-Line
S-Line Heavy Duty Motorsports Ratchet Strap with Soft Ties # XR108-2P $30.95
S-Line 1.25-Inch x 8-Foot Heavy Duty Motorsports Ratchet Strap comes in a value pack of 2. Straps come pre-threaded and ready to use right out of the package. Each strap has a soft-tie option built in, and full-size vinyl coated hooks with keepers. There is a sewn loop end to prevent pull through and spring-loaded webbing storage clamp. Each ratchet tie down has a working load limit of 700 lbs (318 kg).
Condor Mount Type Helmet Hanger Condor Mount Type Helmet Hanger
Condor Condor Mount Type Helmet Hanger # MTHH $36.99
Your motorcycle helmet is too expensive to leave it laying around. Hanging it up keeps it safe and allows for air to circulate inside to keep the liner dry and fresh smelling. Our Helmet Hangers work on all types of helmets, including full face helmets, open face helmets, motor cross helmets, snowmobile helmets, and auto racing helmets. AND, you can also use it to hang your jackets, too! Just put any jacket on a clothes hanger and hang it on the Helmet Hanger, before you hang your helmet. Our Helmet Hanger is sturdy enough to hold any leather jacket or race suit, in addition to your helmet. The Mount Type Helmet Hanger is suitable for all mounting applications. It can be mounted on trailer walls, garage walls or doors, or any place you want to hang your helmet. Made from 1/8″ rolled steel, EE powder-coated and rubber stripped for optimum helmet protection.  
Condor Universal Helmet Hanger Condor Universal Helmet Hanger
Condor Condor Universal Helmet Hanger # UHH $36.99
Your motorcycle helmet is too expensive to leave it laying around. Hanging it up keeps it safe and allows for air to circulate inside to keep the liner dry and fresh smelling. Our Universal Helmet Hanger works on all types of helmets . . . from full face, open face, and motocross helmets, to snowmobile, and auto racing helmets. The Condor® Helmet Hanger is designed to hang over doors, clothes rods, tent trusses, and office cubicle dividers, etc. Made from 1/8″ hot rolled steel, EE powder-coated and rubber stripped for optimum helmet protection.
Boomerang Bar Motorcycle Chock Condor Boomerang Bar Motorcycle Chock Condor
Condor Boomerang Bar # CHCK-BMBAR $74.95
Our Boomerang Bar is designed to add extra stability to the PS-1500 Pit-Stop, if necessary, because of an extended front fork or other special circumstances. Many original equipment manufacturers, like Harley-Davidson, Indian, Victory, Yamaha, Kawasaki and others, have used a boomerang bar on the Pit Stops that they place their motorcycles on at many shows where people can get on and off their bikes.   Simply attach the Boomerang Bar to the existing holes located at the rear of your PS-1500 (legs facing Back). The bar is made from high quality steel with a nonskid pad.

TRAILER PARTS & ACCESSORIES

Family owned and operated since 2008

CAN'T FIND WHAT YOU NEED?

Contact us and we'll get it!