Trailer Parts and Accessories for Safe and Reliable Towing – Page 24

Quietite Tri Ball Mount with 2" Receiver with the QUIETITE™ Wedging Shank # Q-TBM-VAR-0-P-PX $43.95
$63.95

Tri Ball Mount with the QUIETITE™ Wedging Shank Variable load ratings depending on the ball size Fits into a 2” hitch receiver 1 7/8”, 2”, & 2 5/16” Balls Powder Coated With Pin & Clip Eliminates looseness and instability between the receiver and ball mount shank Stabilizes hitch mounted mud flaps Includes Pin & Clip How the Quietite™ Wedging Shank Works When a ball mount or carrier shank is inserted into a receiver there is a gap between the surfaces, which allows the ball mount to be loose and rattle. Rocky Mountain Hitch’s Quietite™ Wedging Shank design completely eliminates this annoying rattling. The Quietite™ Wedging Shank uses a tightening bolt system that forces all four surfaces of the shank to press firmly against the four inside surfaces of the mating receiver, thus eliminating the gap and ensuring a quiet and tight ball mount or carrier. The Ball Mounts are rated to a load capacity of up to 7500 GVWR in accordance with SAE J684. If you are using hitch mounted mud flaps that attach to a ball mount, the Quietite™ Wedging Ball Mount will completely stabilize the mud flaps, stopping them from rocking and moving around.

KTI Hydraulics 2-Way UP Valve # 190119 $149.85

PJ KTI replacement hydraulic 'up' valve. 2-way valve (recognized by the hex nut on top) Typically used on the 'up' circuit with a round coil. Fits KTI hydraulic power down/up pumpsNote: Does NOT fit the KTI power/up and gravity down pumps

KTI Pump Seal Kit (46-2) # 190312 $95.65

Seal Kit for KTI Pump 46-2

Sold out

KTI Remote Ctrl with cable 4 Button # 190122 from $129.95

For hydraulic dovetail trailers The controller has up, down, in, out buttons

Sold out -21% sale

Andersen WD Bracket set 7"-8" (2 inside & 2 outside w/hardware) # AND3387 $165.95
$209.95

Made exclusively for the Andersen Weight Distribution Hitch. The 7-8 inch brackets fit all standard 7" and 8" trailer frames and work with all models of the Andersen Weight Distribution Hitch The extra length of the bracket provides the optimum angle for efficient weight distribution. Includes 2 inside brackets, 2 outside brackets, and mounting hardware as shown in the picture. What Andersen Weight Distribution kit do I need? See the Andersen Hitches WD Hitch Fitment Guide for details about finding the right WD Hitch for you.

Andersen EZ Adjust / EZ HD / WD Hitch Non-Locking Adjustment Rack Pin # AND3364 $14.95

Non-locking adjustment pin for all Andersen EZ Adjust, EZ HD and WD Hitches* Includes 1 adjustment pin and 1 clip. Fits the adjustment rack on all EZ Adjust Hitches, EZ HD Hitches, and WD Hitches* Attaches Andersen Combo Balls to the appropriate EZ Adjust, EZ HD, or WD adjustment rack Measures 2-15/16" x 3/4" Made of hardened steel Made in the USA *NOTE: Do NOT use this pin to attach the WD ball housing to the rack (only use the bolts and nuts provided in the WD kit).

6 Leaf Slipper Spring for 12K Trailer Axles 6 Leaf Spring Dexter

Dexter 6 Leaf Slipper Spring for 12K Trailer Axles # 120096 $282.95

This 6-leaf slipper spring is 30-1/2" long x 3" wide . It is designed for use on trailers with 12,000-lb axles. Single Spring Capacity: 6,000 lbs Axle Capacity: 12,000 lbs Thickness of Leaves: 3/8" Number of Leaves: 6 Spring width: 3" Spring length: 30-1/2" Spring eye size: 1" Construction: Steel Finish: Black Paint

Chopper Chock Cradle for Pit-Stop Motorcycle Chock Condor

Condor Chopper Chock Cradle for Pit-Stop # CHCKCRAD-90 $125.95

Condor® Chopper Chock Cradle (Part #: CHCKCRAD) Our Chopper Chock cradles are designed to be used for bikes with extremely low "Hugger" front fenders. Order the cradle that fits your particular need for a 90, 120, 130, 140 or 150mm front tire size. The cradle is designed to hug the sides of the tire and fit between the tire and the fender, making it very popular for choppers and custom bikes, so you won't damage the fender. CHCKCRAD-120 is for the Pit-Stop/Trailer-Stop or Chopper Chock.

PJ Trailers Stud 9/16"-18 For Spare Tire Mount # 111578 $6.15

This is the 9/16" stud used in our spare tire mount as of 11/2010. Lug nut for this stud: 111533

Condor Boomerang Bar # CHCK-BMBAR $74.95

Our Boomerang Bar is designed to add extra stability to the PS-1500 Pit-Stop, if necessary, because of an extended front fork or other special circumstances. Many original equipment manufacturers, like Harley-Davidson, Indian, Victory, Yamaha, Kawasaki and others, have used a boomerang bar on the Pit Stops that they place their motorcycles on at many shows where people can get on and off their bikes. Simply attach the Boomerang Bar to the existing holes located at the rear of your PS-1500 (legs facing Back). The bar is made from high quality steel with a nonskid pad.

Bumper Pull Std Ball Mount for Shocker Hitch (1.25″hole) Ball Mount Shocker Hitch

Shocker Hitch Bumper Pull Std Ball Mount for Shocker Hitch (1.25″hole) # SH-300125 $89.95

Standard ball mount w/ 1.25″ hole for Shocker Hitch Receiver Mount’s use on SH-200, SH-250, & SH-260. Standard ball mount with ball height range from -0.5″ to -3.5″

Bumper Pull Double Lip Clevis Receiver Mount for Shocker Hitch (1.25″ holes) Receiver Mount Shocker Hitch

Shocker Hitch Bumper Pull Double Lip Clevis Receiver Mount for Shocker Hitch (1.25″ ho... # SH-360 $188.25

Clevis pin mount (double lip) w/ 1.25″ holes for Shocker Hitch Receiver Mount’s use on SH-200, SH-250, & SH-260.

PJ Trailers Cylinder 5" x 30" x 2" - For D6, D2 without scissor # 190206 $898.75

For D6, D2 without scissorThis cylinder is approximately 6"OD; 30" stroke (measure between two plugs) and 5" bore with a 2" ram.

Triple Action KTI Hydraulic Pump w/Remote Pumps KTI

KTI Hydraulic Pump, Triple Action w/Remote & 6qt Tank # 190614 $889.99

DC 4000 Series Triple Acting This Pump Features Power Up , Power Down , and Gravity Down action Used on D2 D3 D5 D7 D8 DL D9 DJ DN DS dump trailers and all powered tilts. Includes 3 button controller and translucent tank Pressure limited to 3200 psi up and 1500psi down Gravity down feature extends battery life Uses AW-32 Non Foaming Fluid or ATF Length 21.5" x Height 8" x Width 8" Recommended Hydraulic fluid: Premium hydraulic oil with proper ISO Viscosity Grade and additives such as Chevron EP, Mobile DTE 10, DTE 20 series or Shell Tellus would be acceptable.

Single Action KTI Hydraulic Pump w/Remote Pumps KTI

KTI Hydraulic Pump, Single Action w/Remote & 4qt Tank # 190600 $599.99

DC 4000 Series Single Acting POWER UP, GRAVITY DOWN Description For applications with a single acting cylinder that extends the cylinder by power and retracts the cylinder by gravity. Specifications Motor: 12V or 24V DC Pressure: 500 – 4000 PSI (35 BAR – 275 BAR), Typical pressure for 12V DC = 3200 PSI (220 BAR) Pump: 0.5 GPM(1.875 LPM) to 5 GPM(18.75 LPM) based on specification Control:2 button wired remote pendant 4 Qt Reservoir Technical Application Tipper/Dump Trailer Leveling System Hydraulic Jack Dump Body Lift Table Recommended Hydraulic fluid: Premium hydraulic oil with proper ISO Viscosity Grade and additives such as Chevron EP, Mobile DTE 10, DTE 20 series or Shell Tellus would be acceptable.

M6 Trim Plate Bolt Kit Rock Tamers Hardware Rock Tamers

Rock Tamers M6 Trim Plate Bolt Kit # RT054 $11.50

The Trim Plate Bolt Kit is used to secure the Rock Tamers Trim Plate (RT028) to the Mud Flap (RT022) Kit Includes: 8 M6 Trim Plate Bolts 8 M6 Trim Plate Spacers 8 M6 Flat Washers 8 M6 Nylon Insert Hex Nuts 1 Locking Star Pin Wrench (black)

Sold out

RC Trailers Door Latch # RC415151 $43.95

For curb side DoorLatch Size is 5" x 2"

Tarp Guide Pull Bar End Cap Tarp Kit Hardware PJ Trailers

PJ Trailers Tarp Guide Pull Bar End Cap # 160449 $58.15

cast aluminum piece that mounts on each end of the pull bar on our Landscape style dump trailer tarp kits It attaches with set screws and acts as a guide to keep the tarp straight as it's rolled up.

Tarp Kit Handle Lock Bracket Tarp Kit Hardware PJ Trailers

PJ Trailers Tarp Kit Handle Lock Bracket # 160411 $18.50

Fits between the 160409 drivers side tarp mount bracket and the front wall of the dump trailer bed Used to lock the crank handle into position for travel.

Dexter 5.2K Axle Electric Brake, 89x74 5.2K Axle Dexter

Dexter 5.2K Axle Electric Brake, 89x74 # 110184 $720.00

Dexter Axle 5.2k Electric Brake 6 on 5.5" bolt pattern 89" hubface 74" spring center

22 23 24 25 26

Cant find what you are looking for?

We can Help!

TRAILER PARTS & ACCESSORIES

Family owned and operated since 2008

CAN'T FIND WHAT YOU NEED?

Prices May Vary in Store

Please note that the prices listed on our website are subject to potential variations when shopping at our physical retail locations. Factors such as regional pricing, in-store promotions, operational costs, and inventory management may contribute to differences in product pricing. We strive to keep prices competitive and consistent, but we recommend verifying the prices with the specific store you intend to visit. For any inquiries or concerns, please contact our customer support team. Thank you for your understanding and support.

Find anything you need

All Products (980)

Cant find what you are looking for?

TRAILER PARTS & ACCESSORIES

CAN'T FIND WHAT YOU NEED?