Trailer Parts and Accessories for Safe and Reliable Towing – Page 25

Condor Boomerang Bar # CHCK-BMBAR $74.95

Our Boomerang Bar is designed to add extra stability to the PS-1500 Pit-Stop, if necessary, because of an extended front fork or other special circumstances. Many original equipment manufacturers, like Harley-Davidson, Indian, Victory, Yamaha, Kawasaki and others, have used a boomerang bar on the Pit Stops that they place their motorcycles on at many shows where people can get on and off their bikes. Simply attach the Boomerang Bar to the existing holes located at the rear of your PS-1500 (legs facing Back). The bar is made from high quality steel with a nonskid pad.

Bumper Pull Std Ball Mount for Shocker Hitch (1.25″hole) Ball Mount Shocker Hitch

Shocker Hitch Bumper Pull Std Ball Mount for Shocker Hitch (1.25″hole) # SH-300125 $89.95

Standard ball mount w/ 1.25″ hole for Shocker Hitch Receiver Mount’s use on SH-200, SH-250, & SH-260. Standard ball mount with ball height range from -0.5″ to -3.5″

Bumper Pull Double Lip Clevis Receiver Mount for Shocker Hitch (1.25″ holes) Receiver Mount Shocker Hitch

Shocker Hitch Bumper Pull Double Lip Clevis Receiver Mount for Shocker Hitch (1.25″ ho... # SH-360 $188.25

Clevis pin mount (double lip) w/ 1.25″ holes for Shocker Hitch Receiver Mount’s use on SH-200, SH-250, & SH-260.

Andersen 6" Adjustment Rack (rack only) 2" Shank # AND3422 $139.95

6" Drop/Rise Adjustment Rack for Rapid Hitch (Rack Only) This 6" Adjustment Rack is the piece that inserts into the 2" receiver on your truck. Buying an extra adjustment rack will help you if you change vehicles or lower your truck and you don't want to have to buy a completely new Rapid Hitch. Can also be used in the rise position. 6" Drop/Rise Rated at 10,000 lb GTWR and 1,500 lb tongue Capacity Fits all standard 2" receivers. 2-1/2" Sleeve (part # and3800) required for 2-1/2" receivers For 2-1/2" Receiver ONLY This 6" Adjustment Rack is the piece that inserts into the 2-1/2" receiver on your truck. Buying an extra adjustment rack will help you if you change vehicles or lower your truck and you don't want to have to buy a completely new Rapid Hitch. Can also be used in the rise position. 2-1/2" Shank 6" Drop/Rise Rated at 12,500 lb GTWR and 1,500 lb tongue Capacity Fits all standard 2-1/2" receivers

PJ Trailers Cylinder 5" x 30" x 2" - For D6, D2 without scissor # 190206 $898.75

For D6, D2 without scissorThis cylinder is approximately 6"OD; 30" stroke (measure between two plugs) and 5" bore with a 2" ram.

Triple Action KTI Hydraulic Pump w/Remote Pumps KTI

KTI Hydraulic Pump, Triple Action w/Remote & 6qt Tank # 190614 $889.99

DC 4000 Series Triple Acting This Pump Features Power Up , Power Down , and Gravity Down action Used on D2 D3 D5 D7 D8 DL D9 DJ DN DS dump trailers and all powered tilts. Includes 3 button controller and translucent tank Pressure limited to 3200 psi up and 1500psi down Gravity down feature extends battery life Uses AW-32 Non Foaming Fluid or ATF Length 21.5" x Height 8" x Width 8" Recommended Hydraulic fluid: Premium hydraulic oil with proper ISO Viscosity Grade and additives such as Chevron EP, Mobile DTE 10, DTE 20 series or Shell Tellus would be acceptable.

Single Action KTI Hydraulic Pump w/Remote Pumps KTI

KTI Hydraulic Pump, Single Action w/Remote & 4qt Tank # 190600 $599.99

DC 4000 Series Single Acting POWER UP, GRAVITY DOWN Description For applications with a single acting cylinder that extends the cylinder by power and retracts the cylinder by gravity. Specifications Motor: 12V or 24V DC Pressure: 500 – 4000 PSI (35 BAR – 275 BAR), Typical pressure for 12V DC = 3200 PSI (220 BAR) Pump: 0.5 GPM(1.875 LPM) to 5 GPM(18.75 LPM) based on specification Control:2 button wired remote pendant 4 Qt Reservoir Technical Application Tipper/Dump Trailer Leveling System Hydraulic Jack Dump Body Lift Table Recommended Hydraulic fluid: Premium hydraulic oil with proper ISO Viscosity Grade and additives such as Chevron EP, Mobile DTE 10, DTE 20 series or Shell Tellus would be acceptable.

M6 Trim Plate Bolt Kit Rock Tamers Hardware Rock Tamers

Rock Tamers M6 Trim Plate Bolt Kit # RT054 $11.50

The Trim Plate Bolt Kit is used to secure the Rock Tamers Trim Plate (RT028) to the Mud Flap (RT022) Kit Includes: 8 M6 Trim Plate Bolts 8 M6 Trim Plate Spacers 8 M6 Flat Washers 8 M6 Nylon Insert Hex Nuts 1 Locking Star Pin Wrench (black)

Sold out

RC Trailers Door Latch # RC415151 $43.95

For curb side DoorLatch Size is 5" x 2"

Tarp Guide Pull Bar End Cap Tarp Kit Hardware PJ Trailers

PJ Trailers Tarp Guide Pull Bar End Cap # 160449 $58.15

cast aluminum piece that mounts on each end of the pull bar on our Landscape style dump trailer tarp kits It attaches with set screws and acts as a guide to keep the tarp straight as it's rolled up.

Tarp Kit Handle Lock Bracket Tarp Kit Hardware PJ Trailers

PJ Trailers Tarp Kit Handle Lock Bracket # 160411 $18.50

Fits between the 160409 drivers side tarp mount bracket and the front wall of the dump trailer bed Used to lock the crank handle into position for travel.

Dexter 5.2K Axle Electric Brake, 89x74 5.2K Axle Dexter

Dexter 5.2K Axle Electric Brake, 89x74 # 110184 $720.00

Dexter Axle 5.2k Electric Brake 6 on 5.5" bolt pattern 89" hubface 74" spring center

Sold out

Breakaway Kit with Charger Breakaway Switch TAP

TAP Breakaway Kit with Charger # 112215 $40.25

Ironworks Industries Gooseneck Coupler, Square, Adjustable - 30K # IWGNTW-30000 $327.95

Capacity: 30KLift: 7"Outer Diameter: 4.5", RoundPipe Thickness: .24"Ball Size: 2-5/16"Finish: Bare SteelIncludes: Top wind crank and 1 set screw

PJ Trailers Standup Ramp Stabilizer 41.25" # 160247 $36.00

Bar holds ramp in upright position for travel. Bar is 3/8" thick, 2" wide by 41-1/4" long with holes on ends for quick pins. Bar ends are slightly bent.

Sold out

PJ Trailers Ramprod 40" x 1.5" # 180182 $55.95

Rod is used on standup ramps in DOUBLES not TRIPLES

Ironworks Industries Weld on D-Ring - 5/8" # 180118 $7.99

5/8" Weld on D-RingSafe working load: 6130lbsUltimate Breaking Strength: 18390lbs

Ironworks Industries Weld on D-Ring - 1/2" # IW18040 $7.99

1/2" Weld on D-RingSafe working load: 4080lbsUltimate Breaking Strength: 11780lbs

Gooseneck Coupler, Square - 25K Gooseneck Coupler Ironworks Industries

Ironworks Industries Gooseneck Coupler, King Pin, Square - 25K # IWGNKPST-25000 from $235.95

Capacity: 25KOuter Diameter: 4.5" Square Tube, 4 Height SettingsPipe Thickness: .24"Finish: Bare SteelIncludes: 3/4" Locking Pin and 1 set screws

Gooseneck Coupler, Round - 25K Gooseneck Coupler Ironworks Industries

Ironworks Industries Gooseneck Coupler, King Pin, Round, Adjustable - 25K # IWGNKPRT-25000 from $224.75

Capacity: 25KOuter Diameter: 4.5" Round Tube, 4 Height SettingsPipe Thickness: .24"Finish: Bare SteelIncludes: 3/4" Locking Pin and 2 set screws

23 24 25 26 27

Cant find what you are looking for?

We can Help!

TRAILER PARTS & ACCESSORIES

Family owned and operated since 2008

CAN'T FIND WHAT YOU NEED?

Prices May Vary in Store

Please note that the prices listed on our website are subject to potential variations when shopping at our physical retail locations. Factors such as regional pricing, in-store promotions, operational costs, and inventory management may contribute to differences in product pricing. We strive to keep prices competitive and consistent, but we recommend verifying the prices with the specific store you intend to visit. For any inquiries or concerns, please contact our customer support team. Thank you for your understanding and support.

Find anything you need

All Products (1007)

Cant find what you are looking for?

TRAILER PARTS & ACCESSORIES

CAN'T FIND WHAT YOU NEED?