Wiring harness and accessories – PJ Trailers Canada, Inc.

Cold Weather Harness Wiring Harness PJ Trailers

PJ Trailers Cold-Weather Replacement 7-Way RV Blade with 8' Wires (Trailer Side) # CU56612 $84.95

Replaces the trailer-end plug of any 7-way harness Soft thermoplastic elastomer casing remains flexible in cold temperatures Temperature rating from -40F up to 221F Interchangeable with other 7-way RV blade connectors 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power 8' cord length to fit your specific towing setup Color-coded wires for easier splicing

Sold out

Harness Mx Front New 7 pin (hooded) Wiring Harness PJ Trailers

PJ Trailers Harness Mx Front New 7 pin (hooded) # 170296 $67.45

This is the NEW style front section for the JKD 7 pin harness.Some older trailers may require the use of an adapter (part # 170289) if yours has a pin in the center with 5 around the outside, you will need the adapter. Harness is 9' 3" long.

True North Trailers 64" 4-Way Flat Harness # VXWL405 $37.62

Replacement wiring harness for True North trailers with 4-pin wiring harnesses. 64" Long

Sold out

Rear Harness for Gooseneck Wiring Harness PJ Trailers

PJ Trailers Rear Harness for Gooseneck # 170291 $91.00

Fits Most Trailers except carhaulers... including goosenecks,deckovers and dumps.

Sold out

PJ Trailers Front Wiring Harness - 120" with 7way Plug # 170287 $49.00

Front harness for domestic built goosenecks connects the junction box to tow vehicle.

PJ Trailers Complete Harness - 22'-24' (7 way) # 170298 $182.25

Harness used on CC or C6 trailers For trailers built in our Mexico plant that are longer than 20 feet.

Sold out

Complete Harness - 18'-20' (7 Way) Complete Wiring Harness PJ Trailers

PJ Trailers Complete Harness - 18'-20' (7 Way) # 170281 $173.25

Fits 18'-20' channel utility trailers This is a modular harness used on Mexico built trailers

Sold out

Harness for HT20 Complete Wiring Harness PJ Trailers

PJ Trailers Harness for HT20 # 170282 $270.85

Fits 20 foot heavy tilt seminole trailers?.this is a modular harness used on Mexico built trailers

Harness - 12-14' 4-Pin Plug Complete Wiring Harness PJ Trailers

PJ Trailers Harness - 12-14' 4-Pin Plug # 170285 $94.95

Fits 12'-14' Channel Utility Trailers? Modular harness used on Mexico built trailers

Adapter for 7-Way Harness for RV Wiring Harness PJ Trailers

PJ Trailers Adapter for 7-Way Harness for RV # 170289 $25.75

The front section of the sealed harness on Mx built trailers used to have a 7 way RV style connector on one end and smaller 6 way round plug on the other with the red,white and blue wires exiting harness before the small end. This harness has been discontinued . In order to replace the front section of your old style harness, you need one of these adapters plus a 170296 front harness.

Sold out

PJ Trailers Front Harness for Gooseneck with 7-Way Plug (120") # 170287 $49.00

Front harness for domestic built goosenecks Connects the junction box to tow vehicle.

Hopkins 48" Easy Pull 4-Way Flat Harness # 38134 $9.99

Easy pull 4-way flat wiring harnesses 48" Long

Curt Custom 4-Flat, Select Mitsubishi Outlander, OEM Tow Package Required # CU56296 $54.30

Plugs into existing OEM vehicle socket to provide a 4-way flat socket Simple plug-and-play design eliminates the need for cutting or splicing 4-way flat output connects tail lights, brake lights and turn signals Equipped with a 3-wire to 2-wire tail light converter Dust cover included to keep connector clean when not in use Backed by a limited one-year warranty Notes: Factory (OEM) tow package required for installation Battery connection must be fuse-protected (10-amp max) Includes fuse holder, battery connection wiring and other necessary wiring components PRODUCT SPECIFICATIONS Part Type - Custom Wiring Connector Installation Difficulty - Moderate Battery-Powered - Yes Material - Blank T-Connector Location - S4 Warranty - One-Year Limited Warranty Shipping Weight - 0.996 Turn and Brake Circuits - 3.0 Amps Tail Light Circuits - 6.0 Amps Electrical System Type - 3W Output Type - 4-Way Flat Converter Type - Circuit Protected and Powered PRODUCT DETAILS Making memories doesn't start when you reach your destination; it starts at the very first mile of your journey. Wherever your road begins and wherever it takes you, Bring It® with the power of CURT. CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With a plug-and-play connector, a custom wiring connector easily integrates with your vehicle to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring connector features a vehicle-specific design to perfectly fit certain years of the Mitsubishi Outlander (factory tow package required; to verify vehicle compatibility, see the CURT application guide or use the Vehicle Lookup on the CURT website). It uses an OEM-compatible connector to plug into the vehicle's OEM socket and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring connector, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring.

Curt Custom Wiring Harness, 4-Way Flat Output, Select Toyota Avalon, RAV4 # CU56350 $109.50

Plugs into vehicle tail light assembly to provide a 4-way flat socket Simple plug-and-play design eliminates the need for cutting or splicing 4-way flat output connects tail lights, brake lights and turn signals Equipped with a powered tail light converter Constructed with SMT circuitry for better performance and durability Dust cover included to keep connector clean when not in use Backed by a limited one-year warranty Notes: Battery connection must be fuse-protected (15-amp max) Includes fuse holder, battery connection wiring and other necessary wiring components PRODUCT SPECIFICATIONS Installation Difficulty : Difficult Material : Blank Part Type* Shipping Weight : 1.950 Tail Light Circuits : 6.0 Amps Product Weight : 1.950 Battery-Powered : Yes Turn and Brake Circuits : 3.0 Amps T-Connector Location : S3,S4 Electrical System Type : 3W Converter Type : Circuit Protected, Powered, Potted Output Type : 4-Way Flat Warranty : One-Year Limited Warranty PRODUCT DETAILS Making memories doesn't start when you reach your destination; it starts at the very first mile of your journey. Wherever your road begins and wherever it takes you, Bring It® with the power of CURT. CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Toyota Avalon and RAV4 (to verify vehicle compatibility, see the CURT application guide or use the Vehicle Lookup on the CURT website). It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring.

-7% sale

Rear Harness for Carhauler Wiring Harness PJ Trailers

PJ Trailers Rear Harness for Carhauler # 170290 $84.99
$91.00

This harness fits domestic built carhauler trailers and connects tail tights and marker lights on back bumper.

Curt Custom Wiring Harness, 4-Way Flat Output, Select Mitsubishi Outlander # CU56189 $95.45

Plugs into vehicle tail light assembly to provide a 4-way flat socket Simple plug-and-play design eliminates the need for cutting or splicing 4-way flat output connects tail lights, brake lights and turn signals Equipped with a powered 3-wire to 2-wire tail light converter Constructed with SMT circuitry for better performance and durability Dust cover included to keep connector clean when not in use Backed by a limited one-year warranty PRODUCT SPECIFICATIONS Material - Blank Warranty - One-Year Limited Warranty Part Type - Custom Wiring Harness Installation Difficulty - Difficult T-Connector Location - S3,S4 Battery-Powered - Yes Shipping Weight - 1.720 Turn and Brake Circuits - 3.0 Amps Tail Light Circuits - 6.0 Amps Electrical System Type - 3W Output Type - 4-Way Flat PRODUCT DETAILS Making memories doesn't start when you reach your destination; it starts at the very first mile of your journey. Wherever your road begins and wherever it takes you, Bring It® with the power of CURT. CURT custom wiring provides everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, a custom wiring harness easily integrates with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. This custom wiring harness features a vehicle-specific design to perfectly fit certain years of the Mitsubishi Outlander (to verify vehicle compatibility, see the CURT application guide or use the Vehicle Lookup on the CURT website). It uses OEM-compatible connectors to "T" into the vehicle's taillight assembly and provides a standard 4-way flat output to power the taillights, brake lights and turn signals on your trailer. To complete this custom wiring harness, it comes with a rubber dust cover. This cover keeps the connection points clean and well protected when the connector is not in use. Once installed, the connector can also be conveniently mounted on the vehicle's trailer hitch receiver tube, using a CURT Easy-Mount connector bracket. The bracket mounts onto the trailer hitch with no drilling required, and its powder-coated steel construction provides a solid attachment point for plugging in the trailer wiring.

Sold out

Complete Harness - 6' (7 Way) Complete Wiring Harness PJ Trailers

PJ Trailers Complete Harness - 6' (7 Way) # 170280 $126.00

Fits 16' channel utility trailers? This is a modular harness used on Mexico built trailers

Harness - 12-14' 7-way with brake Wiring Harness PJ Trailers

PJ Trailers Harness - 12-14' 7-way with brake # 170283 $167.00

Fits 12'-14' channel utility trailers?. This is a modular harness used on Mexico built trailers

Sold out

Electric Brake Harness Wiring Harness PJ Trailers

PJ Trailers Electric Brake Harness # 170286 $11.00

"Jumper" wires that go down to brake connections on axles from frame. Duplex 14ga. wire with black and white inner insulation and grey jacket.

Cant find what you are looking for?

We can Help!

TRAILER PARTS & ACCESSORIES

Family owned and operated since 2008

CAN'T FIND WHAT YOU NEED?

Prices May Vary in Store

Please note that the prices listed on our website are subject to potential variations when shopping at our physical retail locations. Factors such as regional pricing, in-store promotions, operational costs, and inventory management may contribute to differences in product pricing. We strive to keep prices competitive and consistent, but we recommend verifying the prices with the specific store you intend to visit. For any inquiries or concerns, please contact our customer support team. Thank you for your understanding and support.

Find anything you need

Wiring harness and accessories (19)

Cant find what you are looking for?

TRAILER PARTS & ACCESSORIES

CAN'T FIND WHAT YOU NEED?