Black Friday

The Andersen EZ Block is an extremely strong and durable jack block that is perfect for all bumper-tow trailers. It works with scissor jacks, post jacks, pad jacks, and more! These blocks feature a recessed post hole that helps prevent post jacks from slipping. The EZ Block is designed to resist dirt and oil. The blocks are also stackable if you need extra height (Note: do not stack more than two high). The EZ Block from Andersen Hitches is made right here in the USA and comes with a LIFETIME WARRANTY. Like all our plastic products, it's built tough and built to last!   100% Made in the USA Resists dirt, grime and oil Lifetime Warranty (just pay shipping) Finger Holes on each side for easy moving Rated at 2,000 lbs (single or double stacked) Dimensions: 12" x 8.5" base, 8" x 4.5" pad rest, 8" tall (14" tall when double-stacked) Recessed post-hole is 2-1/2" diameter Each block weighs 3.1 lbs

They measure 22” x 12” and come in a set of 2.  They have stainless trim on the bottom and come with generic mounting hardware.

With the innovative Camper Leveler you can level your RV or trailer on the FIRST try - every single time! No more guesswork! No more hassle! Simply drive up until you are level and then chock - it's that simple. The Andersen Camper Leveler provides 'dead-on' leveling at any increment from 1/2" to 4" - no other leveler is this precise - or this easy to use! The Camper Leveler from Andersen Hitches is built tough and built to last. Each kit includes 1 leveler and 1 chock. We recommend 1 leveler per axle. Level your trailer on the first try! Precise leveling at any increment between 1/2 inch and 4 inches Lifts up to 4 inches Works great on trailers up to 30,000 lbs and with tires up to 32" diameter Made in the USA 3-yr Limited Warranty

NEW VERSION NOW HAS BUILT-IN MAGNETS! Faster and more convenient then ever! STABILIZE YOUR RV OR TRAILER! The Andersen 'Trailer Jack Block' eliminates nearly all of the movement in your parked RV or Trailer! You will be amazed how solid everything is when using the Trailer Jack Block with your stabilizer jacks! For great results, use two blocks at the front and two blocks at the back of your RV. If you want the most solid and absolute best results on a trailer that has more than 4 stabilizer jacks, use one block per stabilizer.   LESS STRESS! Using the Trailer Jack block under your jack(s) means your jack doesn't need to extend down as far, saving on wear and tear over time. And because the jack doesn't need to extend fully, there's less stress on it from movement - it's a win-win for RV's and Trailers (and your pocket book)! The Trailer Jack Block is extremely strong and durable -and resists dirt and oil. The blocks are stackable for extra height and can even double as seats or step-stools (Note: do not stack more than two high). The Trailer Jack Block from Andersen Hitches is 100% made in the USA –it's built tough and built to last! Less stress on your RV or Trailer Eliminates nearly all movement and sway in parked RV's and Trailers Extremely strong and durable Resists dirt, grime and oil Rated at 6,000 lbs (single block) and 1,500 lbs (double-stack) 100% Made in the USA Dimensions: 8" tall, 12" dia. base, 10" dia. top (14" tall when double-stacked) Recessed pad area is 9-1/8" diameter, recessed post-hole is 2-1/2" diameter Each block weighs 5.3 lbs 3-yr Limited Warranty

The Rapid Jack is your best friend when it comes to fixing a flat tire or removing a wheel on your multi-axle trailer or dually truck. Simply place the small end of the Rapid Jack under the closest good tire and drive up! NOTHING COULD BE EASIER! It can also be used as a jack wheel holder, a jack post block, and a pad block (see pics). Doubles as a wheel chock. It's the FASTEST jack around ...we call it 'Rapid' for a reason! Made in the USA Keeps you and your clothes clean Weighs only 6 lbs Use with TUFF Chock (part # 3605) for extra support when unhooking trailer on Rapid Jack Works on trailers up to 30,000lbs, Even as a post block 17" long, 6" wide, 7" tall Lifts up to 5-3/4” Resists dirt, grease and oil 3-yr Limited Warranty

Premium UNIVERSAL 360 degrees of solid hardened steel" dual purpose coupler lock (fits Most couplers)."

TRIMAX Chock Lock, Lock it or Lose It! Closed 7″ Open 11.25″ Reach 10.5″

With the innovative Camper Leveler you can level your RV or trailer on the FIRST try - every single time! No more guesswork! No more hassle! Simply drive up until you are level and then chock - it's that simple. The Andersen Camper Leveler provides 'dead-on' leveling at any increment from 1/2" to 4" - no other leveler is this precise - or this easy to use! The Camper Leveler from Andersen Hitches is built tough and built to last. This kit includes 2 leveler and 2 chock. We recommend 1 leveler per axle. Set of 2 Level your trailer on the first try! Precise leveling at any increment between 1/2 inch and 4 inches Lifts up to 4 inches Works great on trailers up to 30,000 lbs and with tires up to 32" diameter Made in the USA 3-yr Limited Warranty

The Full Bed Support System is a set of brackets meant to accompany the Ultimate 5th Wheel Connection - Gooseneck version (3220) and the Ultimate 5th Wheel Connection - Toolbox Model (3220-TBX) when installed on 2015-2019 models of GMC and Chevy Trucks with NO OEM. Will not work on 2020 models and other models with OEM. The brackets help prevent warping that may result from torque forces, and fastens to the frame beneath the rearward bed saver rail. This is recommended with 2015-2019 models of GMC and Chevy Trucks with NO OEM.  The Full Bed support System includes: 2 Brackets 2 U-Bolts 2 Flange Nuts

SALE PRICE AVAILABLE ONLINE ONLY - SALE ENDS DEC. 1st. Each Kit includes 2 levelers and 2 chocks all conveniently contained in a durable duffel bag.  With the innovative Camper Leveler you can level your RV or trailer on the FIRST try - every single time! No more guesswork! No more hassle! Simply drive up until you are level and then chock - it's that simple. The Andersen Camper Leveler provides 'dead-on' leveling at any increment from 1/2" to 4" - no other leveler is this precise - or this easy to use! The Camper Leveler from Andersen Hitches is built tough and built to last. This kit includes 2 leveler and 2 chock. We recommend 1 leveler per axle. Set of 2 Level your trailer on the first try! Precise leveling at any increment between 1/2 inch and 4 inches Lifts up to 4 inches Works great on trailers up to 30,000 lbs and with tires up to 32" diameter Made in the USA 3-yr Limited Warranty

The vueSMART Trailer Camera is the smart way to see behind your trailer. The only wireless trailer camera that installs in minutes. Easy Do-It yourself installation uses existing trailer light No re-wiring required Adapts to work on any trailer with universal mounting bracket Hopkins Towing Solutions Mobile App is accessible to any smart device HiDef Camera delivers the widest angle behind the trailer with a full 152° degrees LED lights help with backing up at nighttime Take a picture or record video at any moment The waterproof design stands up to the harshest environments 1 Year Warranty

This is the world’s BEST tool for changing a tire! Perfect for multi-axle vehicles and leaf spring axle trailers. It makes for quick & easy flat tire repair. Just drive up on the jack with the good tire and change away. The Rapid Jack lifts up 5-3/4 inches and can handle up to 30,000 lbs.   This Kit Includes: 1 Rapid Jack (Lifts 5-3/4 inches) with a Rubber Pad 1 Extendable Lug Wrench (extends from 14” to 21”) 2 Reversible sockets to fit 4 socket different sizes: 11/16” (17mm), ¾” (19mm), 13/16” (21mm), ⅞” (22mm) 1 Tuff Chock 1 Carry Bag

  FOR SINGLE-Axle trailers   All the trailer accessories you need in one tool bag• Making life a little easier for the avid traveler, sportsman, and camper• With this duffel you have all the gear you need to stabilize and level your trailer, keep stabilizer legs from sinking, keep 90% of the dirt outside, and chock your wheels.• Made in the USA• Covered under lifetime warranty Stabilize your trailer: 1 EZ Block Works with scissor and pad jacks 2-½” recessed post hole works great with post jacks Stackable for extra height (no more than 2) Each EZ Block is rated to up to 2,000 lbs, even when double-stacked 8” tall (14” when double-stacked) 12” x 8.5” base, 8” x 4.5” top (pad rest), 2-½” recessed post hole for post jacks Weighs 3.1 lbs Level your RV or trailer on the first try every time: 1 Camper Leveler with 1 Tuff Chock Works great on trailers up to 30,000 lbs and with tires up to 32″ diameter Each Camper Leveler comes with a Tuff Chock Precise leveling at any increment between 1/2” & 4” Keep stabilizer legs from sinking: 4 Tuff Pads (1 pack) Work as a pad for your trailer jack or stabilizer legs Extremely strong and sturdy 8.125” x 8.125” x 0.75” Keep 90% of the dirt outside your RV or Trailer: 1 Clean Step The perfect replacement for a worn out floor mat Unique ridges removes dirt and debris off your shoes and boots Easy to wash Chock your wheels: 2 Extra Tuff Chocks Super thick 1/4” walls Extremely strong & sturdy Made to work with the curve of the Rapid Jack for extra jack support

(14-pc kit w/sturdy bag) With the popular Ultimate Trailer Gear duffel bag you now have all the gear you need to...Level your RV or trailer precisely –on the FIRST try!Change a flat tire (multi-axle or dually vehicles)Keep stabilizer legs from sinkingKeep 90% of the dirt OUTSIDE your RV or TrailerChock your wheelsSaving Time and Money! Each Ultimate Trailer Gear kit includes the following: 2 Camper Levelers with 2 TUFF Chocks 1 Rapid Jack with 1 Rubber Pad 1 Clean Step 4 TUFF Pads  2 Extra TUFF Chocks  1 Sturdy Carry Bag with handles    Made in the USA 3-yr Limited Warranty

The Universal E-Track Adaptor Kit (UNIV-E TRACK) is designed to be used with either a Condor Pit-Stop/Trailer-Stop, (PS-1500) the CONDOR Trailer-Only model (SC-2000), the CONDOR Scooter Chock (SCC-4000) and the Condor Chopper Chock (CHCK-1500). The kit allows our chocks to quickly and securely attach to the E-Track on any trailer platform, whether the E-Track is above the floor, recessed, or flush-mounted. Now you can adjust the position of the chock anywhere along the E-Track for maximum flexibility in positioning a motorcycle, and the chock can be adjusted side to side between the E-Track.  The minimum and maximum center-to-center distances between the mounted E-tracks are 26” and 46” respectively.  Keep in mind that if you are using our PS-1500 the minimum distance between the inside of the tracks is limited by the width of the PS-1500 which is 29”. The Universal E-Track Adaptor Kit comes will all the necessary hardware for assembly, including a Boomerang Bar for added stability to your CONDOR Chock. Also available is our new A-Track Adaptor Kit (A-TRACK KIT), sold separately. The A-Track Adaptor Kit contains all the necessary hardware to adapt our Universal E-Track Adaptor Kit for use with your floor-mounted A-Track. It will allow you to use any Condor Wheel Chock, and adjust its placement, fore and aft, or side to side, along your A-Track, for maximum flexibility in positioning your bike. You must purchase the Universal E-Track Adaptor Kit to use the A-track Adaptor Kit. Made of heavy duty plated steel. Ratchet tie-downs are required for transporting the motorcycle.U.S Patent 8,439,612 B2

6" Drop/Rise with plated steel Combo Ball (2" x 2-5/16")  6" Drop, 6" Rise Towing capacity: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball. (1,500 Lbs Tongue Weight) Polished aluminum won't rust, chip, or peel. Quickly adjust height: Pull pin, adjust, slip pin back into place - done! Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #3800). Meets V5 and SAE J684 certifications.

6" Drop/Rise with plated steel Combo Ball (2" x 2-5/16") , 2-1/2" Receiver 6" Drop, 6" Rise 2-1/2" Receiver Towing capacity: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball. (1,500 Lbs Tongue Weight) Polished aluminum won't rust, chip, or peel. Quickly adjust height: Pull pin, adjust, slip pin back into place - done! Meets V5 and SAE J684 certifications.

8" EZ HD 16K Hitch with 3" Shank   That's right, no need for an adapter sleeve on your 3" receiver!16K GTWR (on the 2-5/16" ball) - up from 14K on our 2" shank version!                8" Drop, 8" Rise 2" x 2-5/16" Combo Ball GTWR Towing Capacity: 10,000 lbs with 2" ball, 16,000 lbs with 2-5/16" ball Tongue Weight: 1,500 lbs Quickly adjust height: Pull pins, adjust, slip pins back into place -done! Fits all standard 3" receivers. Meets V5 and SAE J684 certifications. Made in the USA Need EZ HD Hitch Locking Pins? part # 3429 and part # 3439 Have a 2" receiver? No problem, we still offer our standard 8" EZ HD Hitch (part # 3298), rated at 14K GTWR. Have a 2-1/2" receiver? We also offer a 2-1/2" Shank 8" EZ HD Hitch (part # 3299), rated at 16K GTWR.

With the NEW Ultimate Trailer Gear Trailer Jack Block Bag you now have all the gear you need to... Stabilize your RV or trailer Remove almost all sway Reduce stress & wear on your jacks Keep 90% of dirt outside your trailer Chock your wheels Save time and money AND MUCH MORE!   Each Ultimate Trailer Gear Trailer Jack Block Bag includes the following: 4 Trailer Jack Blocks 4 TUFF Chocks 1 Clean Step 1 Sturdy Carry Bag with handles 

The CONDOR® SC-2000 Trailer-Only Chock is our all-steel version of our Pit-Stop. It has all the same capabilities except it is designed for trailer use only.  Our patented adjustable cradle fits all bikes from dirt bikes and sport bikes, to cruisers and heavy touring bikes, and anything in between, up to 3,000 lbs.  It will work on front and rear tires from 14" to 22" and 80mm to 230mm.  The patented locking mechanism safely and securely supports your motorcycle in an upright position on all transportation platforms. Our chock will hold your motorcycle so securely, only one person is needed to load and unload any bike, and only two tie-down straps are usually required. And you won't damage your sensitive suspension parts because you never need to over-tighten your tie-down straps.  The Trailer-Only chock attaches and detaches to your trailer in seconds with four thumb screws.  You will be amazed at how secure and safe your ride will be once tied down in the CONDOR® wheel chock. The SC-2000 comes complete with all brackets and hardware to mount this unit to your trailer.  The CONDOR® SC-2000  folds down for easy storage and weighs only 26+ lbs. Its dimensions in the upright position are 9” wide, 25” long and 15” high. Once folded, it becomes 9” wide, 25” long and 7” high. If you don't require the free-standing versatility of the Pit-Stop, the Trailer-Only model is the way to go. Condor also offers a Chopper Chock Cradle in sizes 120mm, 130mm, 140mm and 150mm for bikes with low slung hugger fenders.  (see Related Products, below) This is also the perfect wheel chock to attach to your lift table to keep any bike stable while working on it, and it can also extend your lift table by 10".