Trailer Capacity 5K – PJ Trailers Canada, Inc.

QRG 12" QRG Electric Brake Assembly for 5.2, 6 & 7K Axles - LH # 112102 $89.99

12" x 2" Left Hand Side 5,200, 6,000 & 7,000 lbs Axle Quality Running Gear Compatible with Dexter axles *These brakes are not self adjusting*

QRG 12" QRG Electric Brake Assembly for 5.2, 6 & 7K Axles - RH # 112103 $89.99

12" x 2" Right Hand Side 5,200, 6,000 & 7,000 lbs Axle Quality Running Gear Compatible with Dexter axles *These brakes are not self adjusting*

QRG 12" QRG Electric Brake Assembly for 5.2, 6 & 7K Axles - SET # 112102+112103 $179.98

12" x 2" Left + Right Hand Side 5,200, 6,000 & 7,000 lbs Axle Quality Running Gear Compatible with Dexter axles *These brakes are not self adjusting*

25520 Replacement Race for 25580 Bearing Races Redline

Redline 25520 Replacement Race for 25580 Bearing # 111509 $10.00

Race provides smooth surface for bearing to roll on inside of trailer hub. Works with 25580 bearing. Replacement part uses industry-standard number. Features: Outer diameter: 3.265" Matching bearing (sold separately): 25580 5.2 & 7K Dexter Spindle

Dexter 5.2K - Dexter Hub / Idler Only - 1/2" Studs # 111223 $79.00

Dexter axle 5.2k idler hub 6 on 5.5" with studs and races pressed in.Does not include: Bearings Cap Lug Nuts Seal

Sold out

5.2K - Hub / Idler - Complete Kit Hub / Idler Kit QRG

QRG 5.2K - EZ Lube Hub / Idler - Complete Kit # 111101 $137.00

Idler hub for 5.2k axle, 6 on 5.5" bolt patternIncludes: Bearings Races Seal Lug Nuts Grease Cap

Hub/Drum Complete Kit 5.2k - 6 lug for Dexter/QRG Hub / Drum Kit QRG

QRG 5.2K - Hub/Drum Complete Kit 5.2k - 6 lug fits Dexter/QRG # 111046 $169.95

Hub/Drum Kit Fits Dexter or Quality Running Gear 5.2k 6 lug Complete Kit Includes: 111215 x 1 Hub Drum Only 42655 EZ Lube 111501 x 1 Bearing 1.25” ID Bolt Outer 5.2K 111504 x 1 Bearing 1.75” ID Inner #42 Outer #99 111519 x 1 Seal for #42 2.25 x 3.376 111526 x 1 Grease Cap 2.44” A-Lube 5.2K #42 111532 x 6 Lug Nut ½ -20 x 60⁰ Cone

QRG 5.2K - QRG Hub / Drum Only # 111201 $121.75

Hub Drum for 5.2K axle, 6 on 5.5" bolt patternDoes not include: Bearings Races Seal Lug Nuts Grease Cap

Dexter 5.2K - QRG Hub / Drum Only - 1/2" Studs # 111215 $133.66

5.2k Dexter hub and drum only with 5 on 5" bolt pattern with 1/2" StudsDoes not include: Bearings Lug Nuts Cap Seal

Dexter 5.2K Axle - Electric Brakes - 73x58 5.2K Axle Dexter

Dexter 5.2K Axle - Electric Brakes - 73x58 # 110165 $760.45

Dexter Axle 5.2k Electric Brake 73" hubface x 58" spring centers Ez lube spindles 6 on 5.5" bolt pattern cambered beam 1/2" Studs.

Dexter 5.2K Axle - Idler - 89x74 # 110188 $392.48

Dexter U7 axle 5.2k Idler 89" hubface x 74" spring centers Ez lube spindles 6 on 5.5" bolt pattern Cambered beam 1/2" Studs

Dexter 5.2K Axle Electric Brake, 89x74 5.2K Axle Dexter

Dexter 5.2K Axle Electric Brake, 89x74 # 110184 $720.00

Dexter Axle 5.2k Electric Brake 6 on 5.5" bolt pattern 89" hubface 74" spring center

Dexter 5.2K Axle Electric Brake, 95x80 5.2K Axle Dexter

Dexter 5.2K Axle Electric Brake, 95x80 # 110185 $835.65

Dexter Axle 5.2k Electric Brake 95" hubface x 80" spring centers Ez lube spindles 6 on 5.5" bolt pattern cambered beam 1/2" Studs

Sold out

Quietite 5K Ball Mount with 2" Receiver & 4" Drop with the QUIETITE™ Wedging Shank # Q-SBM-5K-4-P-PC $42.99

Single Ball Mount with the QUIETITE™ Wedging Shank 5000 / 500 lb. GVWR / TW, per SAE J684 / V-5 Fits into a 2” hitch receiver 4” Drop Powder Coated With Pin & Clip Eliminates looseness and instability between the receiver and ball mount shank Stabilizes hitch mounted mud flaps Includes Pin & Clip How the Quietite™ Wedging Shank Works When a ball mount or carrier shank is inserted into a receiver there is a gap between the surfaces, which allows the ball mount to be loose and rattle. Rocky Mountain Hitch’s Quietite™ Wedging Shank design completely eliminates this annoying rattling. The Quietite™ Wedging Shank uses a tightening bolt system that forces all four surfaces of the shank to press firmly against the four inside surfaces of the mating receiver, thus eliminating the gap and ensuring a quiet and tight ball mount or carrier. The Ball Mounts are rated to a load capacity of up to 7500 GVWR in accordance with SAE J684. If you are using hitch mounted mud flaps that attach to a ball mount, the Quietite™ Wedging Ball Mount will completely stabilize the mud flaps, stopping them from rocking and moving around.

6 Leaf Spring Double-Eye for 5.2K Trailer Axles 6 Leaf Spring QRG

QRG 6 Leaf Spring Double-Eye for 5.2K Trailer Axles # 120101 $95.50

This 6-leaf slipper spring is 25-1/4" long x 1.75" wide . It is designed for use on trailers with 5,200-lb axles. Features: Flexes to absorb road shock and provide smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Mounts to trailer frame with hangers or a hanger kit (sold separately) Includes nylon bushing Specs: Number of leaves: 6 Eye diameter: 9/16" Spring capacity: 3,300 lbs Axle capacity: 5,200 lbs

Hit N Hitch Auto-locking, 2" Ball, Straight Coupler # TB20020 $27.95

This hitch won't jam and locks with little effort. 500 lbs. (225 kg) Max. Vertical Load. 3,500 lbs. (1,590 kg) Max. Gross Trailer Weight. Formed Steel body for strength and durability. Supplied with a tethered lock pin.