Get Quality Trailer Parts and Accessories - Explore Our Featured Products – Page 2

Condor Height Assist Footrest for Garage Dolly # GD-H-ASSIST-KIT $189.00

Height Assist Footrest for Garage Dolly (Part#: GD-H-ASSIST-KIT) By now we have shipped several hundred of our Garage Dolly units, and have had a lot of positive feedback from you. You have told us that you’ve been using them on all types of motorcycles. We also received some feedback from those of you who have been using them on various “Adventure Bikes” with very tall seat heights. Those tall seat heights have made it challenging for some folks to straddle the bike and remove it from the chock on the dolly, or even just to get off the bike once it has been driven into it. Our solution is the Height Assist Footrests. These are powder coated steel brackets that attach easily to the sides of the unit, and offer the user a place to plant their feet to help when getting on and off the bike by, in effect, making the bike’s seat height more than an inch lower, and to provide excellent leverage to remove the bikes from the Dolly. Also, the Height Assist Bracket is great for people with short inseams (mine is 28”). I have found that the Bracket is a great help for me to remove my Triumph America cruiser bike, and my Ninja 650 sport bike from the Dolly. So if you find that you could use an extra bit of leverage when removing your particular motorcycle, this will be a solution for you as well. If you wish to order a set of Brackets, you can call us to place your order now, and we will ship them out to you when they are ready. Manual Condor Motorcycle Garage Dolly Height Assist Owner's Manual

Sold out

Rock Tamers LED Tail Light Bars for RT Mudflap Systems # RT240 $125.80

The simple design works with existing Rock Tamers Mudflaps hardware and other mudflap systems as well Each tail light bar provides 2 strips of brilliant LED lights, each bar measuring 24 inches by 1 inch wide with 24 LEDs Extruded "C" channel aluminum housing slides over the heads of the flap clamp bolts and tightly secures in place Easy to connect 4 wire flat trailer connector plugs into standard trailer connections The specially designed plug is angled so both the 4 wire flat and 7 blades can be plugged in and used at the same time The lightbar wiring harness has 2 coiled leads, each with water-tight end plugs for secure and trouble-free connections

M5 Flap Retainer Bolt Kit Rock Tamers Hardware Rock Tamers

Rock Tamers M5 Flap Retainer Bolt Kit # RT058 $6.50

The Flap Retainer Bolt Kit is used stabilize the Flap Clamp (RT048), which is connected to the top of the Mud Flap (RT022) Kit Includes: 1 M5 Flap Retainer Bolt (Round Head) 1 M5 Nylon Insert Hex Nut

M8 Flap Clamp Bolt Kit Rock Tamers Hardware Rock Tamers

Rock Tamers M8 Flap Clamp Bolt Kit # RT056 $6.50

The Flap Clamp Bolt Kit is used to connect the Mud Flap (RT022) to the Flap Clamp (RT048) Kit Includes: 5 M8 Flap Clamp Bolts 5 M8 Flat Washers 5 M8 Nylon Insert Hex Nuts

End Cap w/Bolt Kit Rock Tamers Hardware Rock Tamers

Rock Tamers End Cap w/Bolt Kit # RT055 $6.50

The Rod End Cap Kit is used on the end of the Flap Support Rod (RT045)closest to either the Left or Right Hub Arm (RT039 or RT040), to finish the rod look RT055 Kit Includes: 1 Rod End Cap 1 M5 End Cap Bolt (Hex Head) 1 M5 Nylon Insert Hex Nut

B&W Trailer Hitches B&W Biker Bar - Anchor Plate Set # BWMC2305 $42.99

Replaces 2 anchor plates for B&W Biker Bar motorcycle tie-down systems for trailers (BWMC2301, BWMC2302, BWMC2303, and BWMC2304).Includes 2 anchor plates.Note: Mounting lag bolts not included.

Condor Cycle Loader # CL-1000 $699.75

The CONDOR® Cycle Loader is a fully adjustable wheel locking towing system capable of accommodating front and rear wheel sizes from 15-22” / 80-220W. The patented locking mechanism effortlessly and securely supports your motorcycle in an upright position on the ground, on a trailer or on a flatbed. The CONDOR® Cycle Loader works on pavement, concrete, dirt, sand, gravel and all forms of transport platforms such as Flat Beds, Rollbacks, trailers, and pick-up trucks.The Cycle Loader is the perfect device for securing and transporting any and all motorcycles on the market. Due to its simplicity and ease of use, the CONDOR® Cycle Loader requires only one person to operate. All 4 rolling wheels come with individual brakes to allow the unit to be loaded without rolling or sliding. In most cases, the motorcycle needs only to be tied down with two straps, one on either side with attachments towards the middle of the rear. You will be amazed at how secure and safe the motorcycle will be once tied down in our CONDOR® Cycle Loader. The CONDOR® Cycle loader can accommodate bikes weighing over 2000 lbs and can be disassembled easily to fit in any rollback toolbox. Unit breaks down to 35” x 8” x 20” for easy storage and weighs only 55+ lbs. The versatile CONDOR® is also ideal for towing, motorcycle servicing, cleaning, displaying and storage. Our Cycle Loader is the only towing device that is recommended and endorsed by Allstate Towing Service, the United States Auto Club, and others to recover motorcycles for their customers.

Condor Chopper Chock # CHCK-1500-90 $489.95

Adjusts to work with those new huge front wheels, up to 32-inches! **** Looking for a safe way to store or transport your chopper? We've got just what you are looking for.Our Chopper Chock is the first wheel chock specifically designed for the unique requirements of choppers. Now any chopper can be held securely in an upright position in your garage or on any flat surface, or be transported in a trailer safely and securely with only two tie-down straps, and without damaging sensitive suspension parts, such as springs and fork seals. The Chopper Chock also works perfectly with those low-slung “hugger” front fenders, without fear of damage, because our unique chopper cradle is designed to touch only the sides of the tire and nothing else. Best of all, the Chopper Chock requires only one person to load and release the bike for transport, and with our quick-release Trailer Adaptor Kit (included), the whole chock can be installed or removed from the trailer in seconds. The Chopper Chock adds additional bracing for optimum stability for that long raked-out front fork. You choose the right cradle for your tire, in either 90mm, 120mm, 130mm, 140mm, or 150mm. The Chopper Chock adjusts to accommodate those new huge front wheels up to 32-inches! (**** The chock will accommodate a wheel up to 34", provided that the tire width does not exceed 130mm) An Ultra Wide Tire Kit (PS UWCK) is also available if securing the chopper with the rear wheel is desired. The Chopper Chock is not only perfect for transporting the motorcycle, but it’s also perfect for use in a garage, or on any flat surface, to keep the chopper in a stable upright position for easy servicing or detailing, or just showing it off.Now that high dollar chopper can be protected from damage while trailering or just parked in the garage.

Sold out

Condor Scooter Chock # SCC-4000 $299.95

The Universal E-Track Adaptor Kit (UNIV-E TRACK) is designed to be used with either a Condor Pit-Stop/Trailer-Stop, (PS-1500) the CONDOR Trailer-Only model (SC-2000), the CONDOR Scooter Chock (SCC-4000) and the Condor Chopper Chock (CHCK-1500). The kit allows our chocks to quickly and securely attach to the E-Track on any trailer platform, whether the E-Track is above the floor, recessed, or flush-mounted. Now you can adjust the position of the chock anywhere along the E-Track for maximum flexibility in positioning a motorcycle, and the chock can be adjusted side to side between the E-Track. The minimum and maximum center-to-center distances between the mounted E-tracks are 26” and 46” respectively. Keep in mind that if you are using our PS-1500 the minimum distance between the inside of the tracks is limited by the width of the PS-1500 which is 29”. The Universal E-Track Adaptor Kit comes will all the necessary hardware for assembly, including a Boomerang Bar for added stability to your CONDOR Chock. Also available is our new A-Track Adaptor Kit (A-TRACK KIT), sold separately. The A-Track Adaptor Kit contains all the necessary hardware to adapt our Universal E-Track Adaptor Kit for use with your floor-mounted A-Track. It will allow you to use any Condor Wheel Chock, and adjust its placement, fore and aft, or side to side, along your A-Track, for maximum flexibility in positioning your bike. You must purchase the Universal E-Track Adaptor Kit to use the A-track Adaptor Kit. Made of heavy duty plated steel. Ratchet tie-downs are required for transporting the motorcycle.U.S Patent 8,439,612 B2 ManualCradle Removal InstructionsAll Manuals - Support

M6 Arm Clamp Bolt Kit Rock Tamers Hardware Rock Tamers

Rock Tamers M6 Arm Clamp Bolt Kit # RT053 $6.50

The Arm Clamp Bolt Kit is used in either the Left Or Right Hub Arm (RT039 orRT040) to secure the Flap Support Rod (RT045) Kit Includes: 3 M6 Arm Clamp Bolts 3 M6 Nylon Insert Hex Nuts 1 5mm Allen Wrench (solid)

-14% sale

Andersen 6" Rapid Hitch with 2"x2-5/16" Greaseless AlumiBall, 2-1/2" Receiver # AND3405-25 $419.95
$484.95

6" Drop/Rise with Greaseless AlumiBall Combo Ball (2" x 2-5/16") 6" Drop, 6" Rise Greaseless AlumiBall -no need to lubricate tow ball and trailer receiver! Towing capacity: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball. (1,500 Lbs Tongue Weight) Polished aluminum won't rust, chip, or peel. Quickly adjust height: Pull pin, adjust, slip pin back into place - done! Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #AN3800). Meets V5 and SAE J684 certifications. Lifetime replacement warranty on nylon cap!

Sold out

Condor Garage Dolly Ramp # GD-RAMP1-ASM $105.25

Condor Garage Dolly Ramp (Part # GD-RAMP1-ASM) The Condor Garage Dolly (Part # GD-Ramp) accessory ramp is designed for those who might need a bit of assistance to easily load or unload their motorcycles, by having a more gradual transition onto the unit. This sturdy, one-piece powder coated steel ramp attaches to the Dolly with two screws, regardless of where you place the wheel and brake assembly on the unit. Add the supplemental Loader Ramp (L-PB35-C) as on option to extend completely to floor floor for an even easier transition. (sold separately) Owners Manual Condor Motorcycle Garage Dolly Ramp Owner's Manual

Sold out

Rock Tamers Hanger # RT410 $39.99

Looking for a great way to store your Rock Tamers when you're done towing? The RT410 Wall Hanger is your answer! Two wall-mounted arms cradle your Rock Tamers and keep the system up and out of the way. Includes 2 cushioned wall-mounted arms to hold the system and 1 kick plate (double-sided tape backed) for resting the hitch Simple 2 piece design screws together with the included screws to give you a professional, functional and finished look Mounts to standard 16 inch on center wall studs using the four (4) included 1/4 inch x 1.5-inch stainless lag bolts Max holding weight capacity of 70 lbs. Designed to support the Rock Tamers System while still mounted to the drawbar (hitch) if desired Wall storage reduces mudflap curling by allowing the flaps to rest in their natural straight up and down position Easy to install by following included instructions and diagrams

Sold out

Condor Condor Trailer-Only Trailer Adapter Kit # SC-3000 $46.75

This mounting kit, with 2 steel plates and the hardware to attach it to your trailer, pickup truck & table top lift. But if you need an EXTRA kit so you can mount the Trailer-Only Chock in a different spot on your trailer, or to transfer the chock to

Buyers Steel Motorcycle Wheel Chock with Drive-in Lock # BYWC151013 $116.95

Mounts firmly to truck beds, trailers, and garage floors. Drive-in wheel lock makes securing your vehicle quick and easy. Ideal solution for storing or transporting your motorcycle or moped. Fits 17 in. to 21 in. wheels with tires up to 5-1/2 in. wide. Black powder-coated finish for corrosion resistance. Buyers Products Black Powder-Coated Steel Motorcycle Wheel Chock mounts to the floor of a truck bed, trailer, or garage to provide a front tie-down point for motorcycle storage and transport. The drive-in wheel lock makes securing your bike quick and easy. Each chock is constructed from durable 3/4 in. steel tubing with welded braces and a black powder coat finish for corrosion resistance. The tapered chock fits 17 in. to 21 in. wheels with tires up to 5-1/2 in. wide. Product Common Use: Motorcycles, Moped, Motor Scooters, Garage Storage

Condor Garage Dolly Trailer Kit # GD-TK3000 $85.95

This kit is specifically for the Garage Dolly - it has longer crews than the #TK-3000. CONDOR®’s Garage Dolly is now even more versatile! We’ve developed a Trailer Adapter Kit (Part# GD-TK-3000) so you can now use the Dolly to transport your motorcycle in a trailer. The kit contains two separate brackets that mount permanently to the floor of your trailer, one for the front of the Dolly, and another one for the rear of the Dolly. Once installed, simply attach the Garage Dolly to the Trailer Adapter Kit brackets, and ride or roll your bike into the Dolly. First, secure the motorcycle to the Dolly, and then use your tie-down straps to secure the Dolly to the trailer.Now you’re ready to transport your motorcycle safely and securely, just as you do with the Pit Stop Wheel Chock, the Trailer-Only model, or Chopper Chock.

Condor Boomerang Bar # CHCK-BMBAR $74.95

Our Boomerang Bar is designed to add extra stability to the PS-1500 Pit-Stop, if necessary, because of an extended front fork or other special circumstances. Many original equipment manufacturers, like Harley-Davidson, Indian, Victory, Yamaha, Kawasaki and others, have used a boomerang bar on the Pit Stops that they place their motorcycles on at many shows where people can get on and off their bikes. Simply attach the Boomerang Bar to the existing holes located at the rear of your PS-1500 (legs facing Back). The bar is made from high quality steel with a nonskid pad.

M6 Trim Plate Bolt Kit Rock Tamers Hardware Rock Tamers

Rock Tamers M6 Trim Plate Bolt Kit # RT054 $11.50

The Trim Plate Bolt Kit is used to secure the Rock Tamers Trim Plate (RT028) to the Mud Flap (RT022) Kit Includes: 8 M6 Trim Plate Bolts 8 M6 Trim Plate Spacers 8 M6 Flat Washers 8 M6 Nylon Insert Hex Nuts 1 Locking Star Pin Wrench (black)

Condor Universal L-Track Conversion Kit # A TRACK CONVERSION KIT $84.95

The new L-Track Conversion Kit from Condor contains the hardware only to convert your existing Universal E-Track Adapter for use with L-Track. If you do not already own a Universal E-Track Adapter kit, then you will need to purchase our complete Universal L-Track Adapter Kit.

Sold out

Condor Universal L-Track Adapter Kit for Condor products # UNIV-A TRACK $305.95

*May take 2-3 weeks to ship* CONDOR® Universal L-Track Adapter Kit (Part #: UNIV-A TRACK)The Universal L-Track Adapter Kit (UNIV-A TRACK) is designed to be used with either a CONDOR® Pit Stop/Trailer Stop, (PS-1500) the CONDOR® Trailer-Only model (SC-2000), the CONDOR® Scooter Chock (SCC-4000) and the CONDOR® Chopper Chock (CHCK-1500). (**All Chocks sold Separately)The kit allows our chocks to quickly and securely attach to the L-Track on any trailer platform, whether the L-Track is above the floor or flush-mounted. Now you can adjust the position of the chock anywhere along the L-Track for maximum flexibility in positioning a motorcycle, and the chock can be adjusted side to side between the L-Track. The minimum and maximum center-to-center distances between the mounted L-tracks are 26” and 46” respectively. Keep in mind that if you are using our PS-1500 the minimum distance between the inside of the tracks is limited by the width of the PS-1500 which is 29″The Universal L-Track Adapter Kit comes will all the necessary hardware for assembly, including a Boomerang Bar for added stability to your CONDOR® Chock.Made of heavy-duty plated steel. Ratchet tie-downs are required for transporting the motorcycle.U.S Patent 8,439,612 B2

Find anything you need

Featured (49)

Cant find what you are looking for?

TRAILER PARTS & ACCESSORIES

CAN'T FIND WHAT YOU NEED?