# AND3630
$369.95
$416.95
$416.95
For dual-axle bumper pull trailers
All the trailer accessories you need in one tool bag• Making life a little easier for the avid traveler, sportsman, and camper• With this duffel you have all the gear you need to stabilize and level your trailer, change a flat tire (multi-axle vehicles), and keep 90% of the dirt outside.• Made in the USA• Covered under lifetime warranty
Stabilize your trailer:• 4 EZ Blocks– Works with scissor and pad jacks– A 2-½” recessed post hole works great with post jacks– Stackable for extra height (no more than 2)– Each EZ Block is rated to up to 2,000 lbs, even when double-stacked– 8” tall (14” when double-stacked) 12” x 8.5” base, 8” x 4.5” top (pad rest),– 2-½” recessed post hole for post jacks– Weighs 3.1 lbs
Level your RV or trailer on the first try every time:• 2 Camper Levelers with 2 Tuff Chocks– Works great on trailers up to 30,000 lbs and with tires up to 32″ diameter– Each Camper Leveler comes with a Tuff Chock– Precise leveling at any increment between 1/2” & 4”
Change a flat tire (multi-axle vehicles):• 1 Rapid Jack with 1 Rubber Pad– Works on trailers up to 30,000 lbs– Lifts up to 5-¾”– 17″ long, 6″ wide, 7″ tall– Weighs 6 lbs– Made in the USA & covered under lifetime warranty
Keep 90% of the dirt outside your RV or Trailer:• 1 Clean Step– The perfect replacement for a worn out floor mat– Unique ridges removes dirt and debris off your shoes and boots– Easy to wash
# CCMSGSG-50
$379.95
Experience superior outdoor convenience with the Cordova 48 Qt Basecamp Class Hard Cooler, one of the best coolers for camping. Its rugged rotomolded design, high ice retention, and easy-to-carry aluminum handles make it your ultimate companion for all camping adventures.
DIMENSIONS & SPECS
Exterior Dimensions: Length: 28.25" Width: 18" Height: 16.75"
Interior Dimensions: Length: 20" Width: 11.75" Height: 12.25"
Base Dimensions: Length: 22.25" Width: 15.5"
Capacity: 42 cans
Weight: 26 lbs
Proudly hand crafted in Idaho, USA
FEATURES
Top Loader Latches - When prepping for travel, every inch of space counts. We use Top Loader Latches™ so you can pack tight and access what you need without moving surrounding gear.
Anti-Slip Goat Feet - We didn’t name this cooler component Anti-Slip Goat Feet™ for nothing. Goat Feet™ pads won’t budge and keep your contents steady on a variety of surfaces. Added bonus: they prevent the cooler from directly touching hot surfaces, which greatly improves ice retention.
Advanced Delrin® Drain Plug - Quickly drain excess water without losing efficiency. The drain plug is engineered to keep your cooler tightly sealed to maintain maximum ice retention.
Certified Bear Resistant - The Interagency Grizzly Bear Committee has independently certified our coolers as “Bear Resistant” when the bear locks are utilized. If you want to see how the test is conducted (with real bears and real Cordova Coolers) click here. Spoiler alert: It’s awesome.
Patented Lid Lock - Nobody wants a heavy lid to smack down on fingers when retrieving ice cold refreshments. The Lid Lock™ system keeps the lid up and locked in place at 70° and 90° for as long as you need it to.
Anodized Aluminum Handles - Anodized aluminum handles are bolted together, rock solid and lock in place when carrying to provide the perfect grip with no swinging or binding.
Built-In Bottle Opener - Forgetting the bottle opener at home is a drag but have no fear! Cordova has you covered with a bottle opener built right into the sturdy aluminum handles.
Keeps Cold for Days - When pre-cooled, (getting the insulation in the cooler cold, which will melt your first batch of ice) the foam used in all Cordova hard side coolers is robust enough to keep your refreshments cold for days on end.
American Made - From design to finished product, we take pride in the fact that our rotomolded coolers are hand crafted from start to finish in the United States.
# PSTK-6400
$399.95
$469.95
$469.95
This fully adjustable wheel locking system is capable of accommodating either front or rear wheels in sizes from 15-22in or 80-220 mm wide.
The patented locking mechanism securely supports your motorcycle in an upright position on any type of flat surface or transport platform.
The Pit Stop also serves as a Trailer Stop with the optional Trailer Adapter Kit, which allows quick attaching or detaching.
Requires only one person to load or release any motorcycle and in most cases, 2 tie-down straps are required to secure the bike for transport.
# AND3456
$465.95
$529.95
$529.95
6" Rapid Hitch
2" Shank
2"x2-5/16" Combo Ball
Anodized Black
Crafted to meet the towing needs of travellers, hard workers, & outdoorsmen. Our Rapid Hitch is available in black anodized. The adjustable design allows for a simple towing experience. Just pull the pin, adjust the height, and slip the pin back in place. This version of our Original Rapid Hitch features a 6” drop/rise.
# AND3458
$465.95
$545.95
$545.95
8" Rapid Hitch
2" Shank
2"x2-5/16" Combo Ball
Anodized Black
Crafted to meet the towing needs of travellers, hard workers, & outdoorsmen. Our Rapid Hitch is available in black anodized. The adjustable design allows for a simple towing experience. Just pull the pin, adjust the height, and slip the pin back in place. This version of our Original Rapid Hitch features a 6” drop/rise.
# TBS-69-LP
$539.95
Patented RigidCore foam-filled lid to maximize strength and prevent binding
Built lower on the bed rail for a better view out the rear window
0.058" extra-thick, one-piece aluminum tub holds heavy tools and cargo
Stainless steel pull handles provide more clearance for easier opening
Connecting rod allows for convenient operation from driver or passenger side
Interior rod enclosure helps prevent bending or jamming of lock system
Widespread handles are easy to reach from either side of the truck
MicroSeal gasket helps seal out moisture, dust and dirt
Lid self-opens to 90 degrees for convenient operation and loading
Tool trays and built-in screwdriver holders for easy organization
Sliding tray for convenient small item storage and retrieval
Multiple box sizes available for a custom fit on each truck application
Easy to install with pre-drilled mounting slots and included hardware
Assembled in USA
Limited lifetime warranty (one-year finish, one-year parts)
Notes:
Includes box and mounting hardware
# BWMC2301
from $549.95
$589.95
Load and unload your Harley Davidson in less than a minute by yourself with the Biker Bar.
Drive over steep, pitched terrain with your bike securely latched.
Adjustable clamping bar with neoprene lined clamps prevents scratches. Always remove clamping bar when not trailering.
Your motorcycle's suspension is not stressed. When the rider dismounts, the bike's suspension system remains slightly compressed, exerting just the right amount of upward pressure to maintain rigid stability without stressing the suspension components. A bike secured with a Biker Bar becomes an extension of the trailer’s suspension system, instead of amplifying it as an active bike suspension system would. Let your trailer suspension do the work.
Latching system easily unbolts from the trailer without crawling underneath, freeing up your trailer for other things.
Can be mounted in your garage for safely storing your bike.
Works with all Harley Davidson motorcycles with factory painted frames.
Six 1/4" increments of vertical adjustment to accommodate different motorcycle models.
Biker Bar Installation Instructions
Fitting The Biker Bar To Different Motorcycles
# AND3324
$776.95
$923.95
$923.95
Andersen 'No-Sway' Weight Distribution Hitch – 4" drop/rise, 2" receiver, 2" ball, universal frame brackets (3", 4", 5" & 6")
There is a better way –and this is it! Our silent, 'No-Sway,' 'No-Bounce' Weight Distribution Hitch doesn't just raise the bar, it sets it! Combining modern materials, technology and innovation, it’s the simplest, quietest, and most advanced weight distribution hitch on the road today. This is a first in the industry giving trailer owners the best anti-sway option AND the only true Motion-Dampening system (anti-bounce) around. Owners can't believe how smooth and quiet the ride is!
Look at these advantages:
Unparalleled Sway Control that self-adjusts
So quiet you won't even know it's there!
Patented True Motion-Dampening™ system -drastically reduces bounce
Weighs under 60lbs!!
2" ball included –no extras to buy
One pin removal from tow vehicle
Grease-free system –ball and coupler move as one
Easy install –no pry bars needed!
Optional 8" drop/rise adjustable shank available (part #3351)
Doubles as standard ball mount for towing without weight distribution
The smoothest ride around - owners are saying they can't believe it!
No problem backing up –unlike many other weight distribution hitches
10,000 lbs GTWR • 1,400 lbs tongue weight
Lifetime Warranty (limited)
What Andersen Weight Distribution kit do I need?
See the Andersen Hitches WD Hitch Fitment Guide on the Weight Distribution Installation page for details about finding the right WD Hitch for you.
# AND3350
$820.95
$958.95
$958.95
Andersen 'No-Sway' Weight Distribution Hitch – 4" drop/rise, 2-5/16" ball, universal frame brackets (3", 4", 5" & 6") - 2" Receiver
There is a better way –and this is it! Our silent, 'No-Sway,' 'No-Bounce' Weight Distribution Hitch doesn't just raise the bar, it sets it! Combining modern materials, technology and innovation, it’s the simplest, quietest, and most advanced weight distribution hitch on the road today. This is a first in the industry giving trailer owners the best anti-sway option AND the only true Motion-Dampening system (anti-bounce) around. Owners can't believe how smooth and quiet the ride is!
Look at these advantages:
Unparalleled Sway Control that self-adjusts
So quiet you won't even know it's there!
Patented True Motion-Dampening™ system -drastically reduces bounce
Weighs under 60lbs!!
2-5/16" ball included –no extras to buy
One pin removal from tow vehicle
Grease-free system –ball and coupler move as one
Easy install –no pry bars needed!
Optional 8" drop/rise adjustable shank available (part #3351)
Doubles as standard ball mount for towing without weight distribution
The smoothest ride around - owners are saying they can't believe it!
No problem backing up –unlike many other weight distribution hitches
14,000 lbs GTWR • 1,400 lbs tongue weight
Lifetime Warranty (limited)
What Andersen Weight Distribution kit do I need?
See the Andersen Hitches WD Hitch Fitment Guide on the Weight Distribution Installation page for details about finding the right WD Hitch for you.
# AND3380
$829.95
$983.95
$983.95
Andersen 'No-Sway' Weight Distribution Hitch – 8" drop/rise, 2-5/16" ball, 2" Shank, universal frame brackets (3", 4", 5" & 6")
There is a better way –and this is it! Our silent, 'No-Sway,' 'No-Bounce' Weight Distribution Hitch doesn't just raise the bar, it sets it! Combining modern materials, technology and innovation, it’s the simplest, quietest, and most advanced weight distribution hitch on the road today. This is a first in the industry giving trailer owners the best anti-sway option AND the only true Motion-Dampening system (anti-bounce) around. Owners can't believe how smooth and quiet the ride is!
Look at these advantages:
Unparalleled Sway Control that self-adjusts
So quiet you won't even know it's there!
Patented True Motion-Dampening™ system -drastically reduces bounce
Weighs under 60lbs!!
2-5/16" ball included –no extras to buy
One pin removal from tow vehicle
Grease-free system –ball and coupler move as one
Easy install –no pry bars needed!
Optional 4" drop/rise adjustable shank available (part #3353)
Doubles as standard ball mount for towing without weight distribution
The smoothest ride around - owners are saying they can't believe it!
No problem backing up –unlike many other weight distribution hitches
14,000 lbs GTWR • 1,400 lbs tongue weight
Lifetime Warranty (limited)
What Andersen Weight Distribution kit do I need?
See the Andersen Hitches WD Hitch Fitment Guide on the Weight Distribution Installation page for details about finding the right WD Hitch for you.
# AND3100
$829.95
$899.95
$899.95
Transform your 5th wheel trailer with our Ranch Hitch Adapter and use any standard gooseneck hitch in the bed of your truck.
Fits standard 2 5/16" gooseneck ball hitch.
24,000 lb. trailer GTWR and 6,000 lb. tongue weight.
3" vertical adjustment from 11-3/4" to 14-3/4".
Kit includes all hardware for attachment to 5th wheel trailer.
Easy installation, even an inexperienced do-it-yourselfer can install it in less than an hour.
Features Andersen's remote release cable assembly (No need to climb in and out of the truck bed to lock coupler)
Andersen's bell shaped coupler allows for easy hookup even when up to 3" off center.
The ONLY adapter meeting V19 standards.
IMPORTANT: We do not recommend using the Ranch Hitch adapter (3100 or 3139) on a cushioned or moveable pin box, only on static pin box applications.
# AND3221
$1,224.95
$1,372.95
$1,372.95
This "lowered" version of our 5th wheel hitch sits 4" lower and is specially designed for use in flatbed trucks with recessed balls.
Specially made for flatbed trucks that have a RECESSED gooseneck ball
Keep your 5th Wheel warranty intact! Comes with a $5 million supplemental warranty
Features new ball-funnel for easy hook up — even 3" off ball center!
Works with all brands of gooseneck hitches
Base weighs only 35lbs!
Base can be removed or installed in less than a minute!
Complete installation in less than 5 minutes!
Can easily be installed or removed by just one person!
Features a patented remote latch/unlatch cable
Rated at 24,000 lbs GTWR and 4,500 lbs tongue weight
The smoothest ride around — owners are saying they can't believe there's no bucking and no chatter compared to other products on the market
Three height adjustments (measured from bed of truck to top of ball mount): 12-3/8" lower position, 13-7/16" middle position and 14-5/8" upper position
IMPORTANT: If you are using an Andersen Ultimate Connection with a Rota-Flex Pinbox, we REQUIRE you to use a Rota-Flex Lockout Kit to prevent damage to the hitch and/or tow vehicle. It also keeps the rubber pad in your Rota-Flex pin box from shifting over time.
If you need to change the height of your gooseneck ball, you may need a coupler tube to extend the connection of the Ultimate Connection so it can attach to the gooseneck ball. Refer to the Coupler Tube Chart to find the right size Coupler Tube.
See Dimensions
See Installation Manual
See Warranty
# AT1105-8
$1,295.95
$1,395.95
$1,395.95
Specifications
Peak Watts 3,800
Running Watts 3,300
Amps (120V) 27.5A
Amps (240V) N/A
Start Method Recoil Start, Electric Start, Remote Start
Power Delivery Pure Sine EcoMode
Parallel Capability No
Motor 212cc
Noise Level (25%) 57dB(A)
Noise Level (100%) 65dB(A)
Fuel Capacity 7.4L
Runtime (25%) 14.0 hrs
Runtime (100%) 3.4 hrs
Panel Outlets 5-20 20A x 2, TT-30 30A RV, 12V DC, 5A USB Outlet x 2
Choke Fully Automatic
Dimensions 23.2 x 16.5 x 17.7 in.
Unit Weight 96 lbs
Warranty 3 Year Limited
Extended Warranty 12, 24 & 36 Months Available
Additional Features TT-30 RV Plug, USB Ports
The Hyundai HY3800RV was built to simplify RV life. Premium convenience features such as an integrated RV receptacle, remote and electric start, automatic throttle, automatic choke are included to make powering your RV as effortless as pressing a button. Producing a continuous 3,300 watts of clean electricity, the HY3800RV quietly powers sensitive electronics like TV’s Laptops, CPAP machines, microwaves, A/C units, etc. The integrated RV receptacle outputs 120V at 27.5A, perfect for powering appliances such as 13K BTU A/C units and most 15K BTU A/C. An innovative single-outlet parallel port (with cross model support) makes connecting two HY-P series generators easy, allowing you to combine the power of two generators into a single output. Operating at 57 – 65db this unit is campground approved and perfect for RV owners that want effortless power. Backed by a 3-year warranty, 700 service centres across North America, and an experienced customer service team.
# AND3217
$1,299.95
$1,492.95
$1,492.95
Compatibility for the Raised Ultimate 5th Wheel Connection:
This version of the Ultimate Connection is recommended with 2020 and newer truck models, to accommodate for a higher bed rail and tailgate clearance. Do not use on 2019 and older truck models.
To verify the compatibility of the Raised Ultimate Connection with your truck and trailer setup, please read "Do I need a Raised Ultimate 5th Wheel Connection?"
Have a 2019 or older model truck? Check out our Standard Aluminum Ultimate 5th Wheel Connection
Look at these advantages:
Rated at 24,000 lbs GTWR and 4,500 lbs tongue weight
Three height adjustments: 18-1/2" lower position, 19-5/8" middle position and 20-3/4" upper position (both measured from the top of the ball to the top of the truck bed).
Keep your 5th Wheel warranty intact!
Works with all standard brands of gooseneck hitches
Base weighs only 35 lbs!
Features new ball-funnel for easy hook up — even works with 3" off center ball!
Base can be removed or installed in less than a minute by just one person!
Industry leader in fifth wheel hitches for short bed trucks
Features a patented remote latch/unlatch cable
IMPORTANT:
If you are using an Andersen Ultimate Connection with a Rota-Flex Pinbox, we REQUIRE you to use a Rota-flex Lockout Kit to prevent damage to the hitch and/or tow vehicle. It also keeps the rubber pad in your Rota-Flex pin box from shifting over time.
If you need to change the height of your gooseneck ball, you may need a coupler tube to extend the connection of the Ultimate Connection so it can attach to the gooseneck ball. Refer to the Coupler Tube Chart to find the right size Coupler Tube.
See Dimensions
See Installation Manual
See Warranty
# AND3220-GEN3
$1,349.95
Achieve the ultimate 5th wheel experience from installation to destination with the Ultimate 5th Wheel Connection. Extremely strong and lightweight, the Ultimate Connection - Gooseneck Mount base weighs less than 40 lbs and tows up to 24,000 lbs GTWR (Gross trailer weight rating) and 4,500 lbs tongue weight. The Rail Mount tows up to 20,000 lbs GTWR.
See Gooseneck Mount Dimensions.
See Rail Mount Dimensions.
Using any Ultimate 5th Wheel Connection with a Rota-Flex Pin Box requires a Rota-Flex Lockout Kit.
MORryde Pin Box: This is compatible with all versions of the Ultimate Connection ONLY when it is installed with MORryde part # RPB77-006.
Extremely light-weight & Strong
The Ultimate Connection base weighs less than 40 lbs.
Tows up to 24,000 lbs GTWR (Gross Trailer Weight Rating)
Built-in ball funnel
The funnel on the kingpin coupler block provides a 3” offset, eliminating the hassle of perfectly lining up the hitch ball with the kingpin.
Funnel portion is covered under a lifetime warranty
Which Ultimate Connection do I need?
Not sure what mount you need for the Ultimate Connection? Answer a few questions about your truck and trailer, and we will tell you which version of the Ultimate Connection is compatible.