All products
5th Wheel Hitches
5th Wheel Hitches Parts/Accessories
All Products
Andersen
Andersen Hitches
Andersen Weight Distribution Parts
ATV
Axle Lift Kit
Axles
B&W Trailer Hitches
Ball Mounts
Battery + Accessories
Bearings - Races - Seals - Caps
Best Sellers
Best selling products
Best Selling Products
Black Friday
Brackets / Plugs / Grommets
Brake Assemblies
Brake Controllers +
Break away system
Buyers Products
Caliber
Cargo Control
Clearance Markers
CLEARANCE!
Couplers
Curt
Disc Brake Actuator
Driving Lights
Dump Trailer Doors
E-Track
Electrical
Enclosed
Fall Sale
Featured
Fenders & Rails
Gooseneck Hitch
Hit N Hitch
Hitch Pins and Clips
Hubs + Drums
Hydraulics
Incandescent Stop / Tail / Turn
Incandescent Trailer Light Kits
Ironworks
Jacks
Kingpins
KTI Pumps + Parts
LED Clearance Markers
LED Off-Road Lighting / Accessories
LED Stop / Tail / Turn
LED Trailer Light Kits
LEDing Edge Lights
License / Interior / Back-up / Utility
Light Kits
Marine
Monthly
Motorcycle & ATV
Mud Flaps
Mudflaps
New products
Newest Products
Pintle/Ring Hitch
PJ Trailers
Puck System
QRG
Quietite Ball Mounts
Rails
Ramps, Gates & Doors
Rapid Hitch
Ready Rail
Reflectors
Replacement Lens
REPLACEMENT PARTS LIST FOR CT5X10GW & RST6X12
Ring Hitches
Roof Racks
RST6X12SA (040-8046)
Safety & Security
Sale
Sale!
SAVE BIG!
Shocker Hitch
Shop & Yard Lights
Shop lighting
shopyapps - best selling collection
Snowmobile Trailer Accessories
Speed Demon Lights
Stickers
Straps
Studs + Lug Nuts
SuperClamp Sets
SuperClamps
Suspension
Tarps and Hardware
Tie-Downs
Tires & Wheels
Toolboxes
Top Sellers
Tow Bar
Towing
Towing Electrical
Tractor / Work
Trailer Capacity 10K
Trailer Capacity 12K
Trailer Capacity 3.5K
Trailer Capacity 5K
Trailer Capacity 7K
Trailer Capacity 8K
Trailer Fenders
Trailer Gates
Trailer Hitches
Trailer Lights
Trailer Ramps
Trailer Security
TRAILERS
Truck/Trailer Accessories
True North Trailers
U-Bolt Kits
Warning Lights
Weight Distribution
WhereSafe GPS Trackers
Winches
Wiring Harness
Wiring harness and accessories
Work Lights
# AND3414
$432.95
10" Drop/Rise Rapid Hitch with Plated Steel Combo Ball (1-7/8" x 2")
4" to 10" Drop
GTWR: 7,500 lbs with 1-7/8" ball, 8,000 lbs with 2" ball
Tongue Weight: 1,500 lbs
Polished aluminum ball mount and rack won't rust, chip, or peel
Quickly adjust height: Pull pin, adjust, slip pin back into place - done!
Fits all standard 2" receivers. 2-1/2" Sleeve (part # and3800) required for 2-1/2" receivers
Meets V5 and SAE J684 certifications.
Made in the USA.
Need Rapid Hitch Locking Pins? See part # and3429 or part # and3492.
# AND3413-25
$369.95
2-1/2" Shank 10" Drop/Rise Rapid Hitch with Plated Steel Combo Ball (2" x 2-5/16")
2-1/2" Shank
4" to 10" Drop
GTWR: 10,000 lbs with 2" ball, 12,500 lbs with 2-5/16" ball
Tongue Weight: 1,500 lbs
Polished aluminum rack and ball mount won't rust, chip, or peel
Quickly adjust height: Pull pin, adjust, slip pin back into place - done!
Fits all standard 2-1/2" receivers
Meets V5 and SAE J684 certifications.
Made in the USA.
# AND3413
$416.95
10" Drop/Rise Rapid Hitch with Plated Steel Combo Ball (2" x 2-5/16")
Features Include:
4" to 10" Drop
GTWR: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball
Tongue Weight: 1,500 lbs
Polished aluminum rack and ball mount won't rust, chip, or peel
Quickly adjust height: Pull pin, adjust, slip pin back into place - done!
Fits all standard 2" receivers. 2-1/2" Sleeve (part # AND3800) required for 2-1/2" receivers
Meets V5 and SAE J684 certifications.
Made in the USA.
# AND3417
$432.95
10" Drop/Rise with Greaseless AlumiBall Combo (2" x 2 5/16")
4" to 10" Drop
Greaseless AlumiBall - no need to lubricate tow ball and trailer receiver!
Towing capacity: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball. (1,500 Lbs Tongue Weight)
Polished aluminum won't rust, chip, or peel.
Quickly adjust height: Pull pin, adjust, slip pin back into place - done!
Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #3800).
Meets V5 and SAE J684 certifications.
Lifetime replacement warranty on nylon cap!
# AND3417-25
$389.95
10" Drop/Rise with Greaseless AlumiBall Combo (2" x 2 5/16") with 2-1/2" Receiver
4" to 10" Drop
2-1/2" Receiver
Greaseless AlumiBall - no need to lubricate tow ball and trailer receiver!
Towing capacity: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball. (1,500 Lbs Tongue Weight)
Polished aluminum won't rust, chip, or peel.
Quickly adjust height: Pull pin, adjust, slip pin back into place - done!
Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #3800).
Meets V5 and SAE J684 certifications.
Lifetime replacement warranty on nylon cap!
# AND3418
$466.95
10" Drop/Rise with Greaseless AlumiBall Combo Ball (1-7/8" x 2")
10" Drop, 10" Rise
Greaseless AlumiBall -no need to lubricate tow ball and trailer receiver!
Towing capacity: 8,000 lbs with 2" ball, 6,000 lbs with 1-7/8" ball. (1,500 Lbs Tongue Weight)
Polished aluminum won't rust, chip, or peel.
Quickly adjust height: Pull pin, adjust, slip pin back into place - done!
Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #AN3800).
Meets V5 and SAE J684 certifications.
Lifetime replacement warranty on nylon cap!
# BPRM122516
$189.95
Tow up to 24,000 lb with either a ball hitch or pintle mount.
Patented design provides multiple towing options without changing your hitch.
Fits 2-1/2 inch square receiver tubes.
Spring-loaded locking arm provides secure coupling.
Easily hooks up to a coupler or lunette eye.
Built with solid, forged steel for superior strength.
2-5/16 in. tow ball with chrome finish provided - also compatible with other sizes.
Corrosion-resistant black powder-coated finish.
Hitch pins are sold separately.
Haul it your way with the Buyers Products 12 Ton Combination Hitch for 2-1/2 Inch Hitch Receivers. The patented design combines a ball hitch and a pintle hook into a single versatile piece of equipment. This makes it easy to pull loads up to 24,000 lb with either a coupler or drawbar/pintle ring without needing to change hitches. Ideal for tradesmen, contractors, and haulers who tow a range of loads.
Heavy-duty forged steel construction features a corrosion-resistant black powder-coated finish. The hitch fits 2-1/2 in. receiver tubes with a spring-loaded locking arm for secure coupling. It includes a 2-5/16 in. ball with a corrosion-resistant chrome-plated finish, but the unit can accommodate other ball sizes as well.
Hitch pins are sold separately.
# CU45796
$187.00
Extends a 2" x 2" receiver tube by 18"
Provides added clearance for a trailer or hitch-mounted accessory
CNC-formed, robotically welded and mechanically descaled for a perfect fit
Protected by a durable powder coat finish
Made in USA
Limited lifetime warranty (one-year finish, one-year parts)
# BYPM87
$69.99
A versatile mount can be used with a wide range of pintle hooks.
Strong and durable continuous weld construction.
Corrosion-resistant powder-coated finish.
Allows you to change mounting position to accommodate various trailer heights.
Accepts the following Buyers Products pintle hooks: PH5, PH6, PH8, PH10, PH15, PH20 (drilling required), BH8.
MGTW: 14,000lbs
MVL: 2,800lbs
Buyers Products 2 Inch Pintle Hook Mount slides into a 2 in. receiver to provide a mounting plate for a variety of pintle hooks and combination hitches. You can mount a pintle hook at either a high or low position to accommodate trailer height.
The strong, durable construction features continuous welds and a black powder-coated finish for corrosion resistance.
Product Common Use: Towing, Hauling
# BYPM25812
$128.99
Specifications
Color Black
Finish Powder Coat
Material Carbon Steel
Maximum Gross Trailer Weight (M.G.T.W.) 20000 lb
Maximum Vertical Load (M.V.L.) 3000 lb
Mount Type Pintle Mount
Shank Type Tubular
Receiver Size 2.50 "
Vertical Hole Spacing 1.75 "
Horizontal Hole Spacing 3.375 "
Mounting Hole Size 0.562 "
Extension/Length 9.50 "
No. of Mounting Positions 3
# BYPM3109
$214.95
30,000 lb maximum gross trailer weight (MGTW).
6,000 lb maximum vertical load (MVL).
Fits 3 in. hitch receivers.
Four mounting positions to accommodate different trailer heights.
Durable solid-steel construction with a corrosion-resistant black powder-coated finish.
Buyers Products 3 Inch Pintle Hook Mount slides into a 3 in. receiver to provide a mounting plate for pintle hooks and combo hitches. With four different mounting positions, you can easily install your pintle at the right height for your trailer. A 30,000-pound capacity ensures you have the strength needed to get the job done.
The mount is made of durable steel with a solid shank. A black powder-coated finish provides exceptional corrosion resistance.
# AND3294-3
$334.95
4" EZ HD 16K Hitch with 3" Shank
That's right, no need for an adapter sleeve on your 3" receiver!16K GTWR (on the 2-5/16" ball) - up from 14K on our 2" shank version!
4" Drop, 4" Rise
2" x 2-5/16" Combo Ball
GTWR Towing Capacity: 10,000 lbs with 2" ball, 16,000 lbs with 2-5/16" ball
Tongue Weight: 1,500 lbs
Quickly adjust height: Pull pins, adjust, slip pins back into place -done!
Fits all standard 3" receivers.
Meets V5 and SAE J684 certifications.
Made in the USA
Need EZ HD Hitch Locking Pins? part # 3429 and part # 3439
Have a 2" receiver? No problem, we still offer our standard 4" EZ HD Hitch (part # 3294), rated at 14K GTWR.
Have a 2-1/2" receiver? We also offer a 2-1/2" Shank 4" EZ HD Hitch (part # 3291), rated at 16K GTWR.
# AND3298-3
$369.95
8" EZ HD 16K Hitch with 3" Shank
That's right, no need for an adapter sleeve on your 3" receiver!16K GTWR (on the 2-5/16" ball) - up from 14K on our 2" shank version!
8" Drop, 8" Rise
2" x 2-5/16" Combo Ball
GTWR Towing Capacity: 10,000 lbs with 2" ball, 16,000 lbs with 2-5/16" ball
Tongue Weight: 1,500 lbs
Quickly adjust height: Pull pins, adjust, slip pins back into place -done!
Fits all standard 3" receivers.
Meets V5 and SAE J684 certifications.
Made in the USA
Need EZ HD Hitch Locking Pins? part # 3429 and part # 3439
Have a 2" receiver? No problem, we still offer our standard 8" EZ HD Hitch (part # 3298), rated at 14K GTWR.
Have a 2-1/2" receiver? We also offer a 2-1/2" Shank 8" EZ HD Hitch (part # 3299), rated at 16K GTWR.
# AND3294
$283.95
4" EZ HD 14K Hitch with 2" x 2-5/16" Combo Ball
4" Drop, 4" Rise.
Towing capacity: 10,000 lbs with 2" ball, 14,000 lbs with 2-5/16" ball.(1,500 Lbs Tongue Weight)
Quickly adjust height: Pull pins, adjust, slip pins back into place -done!
Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #3800).
Meets V5 and SAE J684 certifications.
# AND3291
$264.95
4" EZ HD 16K Hitch with 2-1/2" Shank
The 3291 is a 2-1/2" shank version of the 3294. That's right, no need for an adapter sleeve with the new 2-1/2" receivers!The weight rating is now 16K (on the 2-5/16" ball) - up from 14K on our 2" shank version!
4" Drop, 4" Rise.
Towing capacity: 10,000 lbs with 2" ball, 16,000 lbs with 2-5/16" ball. (1,600 lbs Tongue Weight)
Quickly adjust height: Pull pins, adjust, slip pins back into place -done!
Fits all standard 2 1/2" receivers.
Meets V5 and SAE J684 certifications.
# AND3462
$289.95
4" Drop/Rise with plated steel Combo Ball (1-7/8" x 2")
4" Drop, 4" Rise
Towing capacity: 7,500 lbs with 1-7/8" ball, 8,000 lbs with 2" ball. (1,500 Lbs Tongue Weight)
Polished aluminum won't rust, chip, or peel.
Quickly adjust height: Pull pin, adjust, slip pin back into place - done!
Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #3800).
Meets V5 and SAE J684 certifications.
# AND3460
$393.50
4" Drop/Rise with plated steel Combo Ball (2" x 2-5/16")
4" Drop, 4" Rise
Towing capacity: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball. (1,500 lbs tongue)
Polished aluminum won't rust, chip, or peel.
Quickly adjust height: Pull pin, adjust, slip pin back into place - done!
Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #AN3800).
Meets V5 and SAE J684 certifications.
# AND3461-25
$369.95
4" Drop/Rise with Greaseless AlumiBall Combo (2" x 2 5/16"), 2-1/2" Receiver
4" Drop, 4" Rise
2-1/2" Receiver
Greaseless AlumiBall -no need to lubricate tow ball and trailer receiver!
Towing capacity: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball. (1,500 Lbs Tongue Weight)
Polished aluminum won't rust, chip, or peel.
Quickly adjust height: Pull pin, adjust, slip pin back into place - done!
Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #AN3800).
Meets V5 and SAE J684 certifications.
Lifetime replacement warranty on nylon cap!
# BPRM5P
$96.95
Quick to install and remove, with an integral shank to fit 2 in. receiver tubes.
Durable and corrosion-resistant powder coating.
Compatible with a wide range of towing accessories from Buyers Products.
Buyers Products 5 Ton Pintle Hook features a single-piece, drop-forged lower jaw and a black powder-coated finish for maximum durability and resistance to corrosion. It fits a 2-in. receiver tube for easy installation and removal.
The pintle hook is ideal for loads up to 10,000 lbs. The 5/8 in. hitch pin is sold separately.
# Q-SBM-5K-4-P-PC
$42.99
Single Ball Mount with the QUIETITE™ Wedging Shank
5000 / 500 lb. GVWR / TW, per SAE J684 / V-5
Fits into a 2” hitch receiver
4” Drop
Powder Coated
With Pin & Clip
Eliminates looseness and instability between the receiver and ball mount shank
Stabilizes hitch mounted mud flaps
Includes Pin & Clip
How the Quietite™ Wedging Shank Works
When a ball mount or carrier shank is inserted into a receiver there is a gap between the surfaces, which allows the ball mount to be loose and rattle. Rocky Mountain Hitch’s Quietite™ Wedging Shank design completely eliminates this annoying rattling. The Quietite™ Wedging Shank uses a tightening bolt system that forces all four surfaces of the shank to press firmly against the four inside surfaces of the mating receiver, thus eliminating the gap and ensuring a quiet and tight ball mount or carrier.
The Ball Mounts are rated to a load capacity of up to 7500 GVWR in accordance with SAE J684. If you are using hitch mounted mud flaps that attach to a ball mount, the Quietite™ Wedging Ball Mount will completely stabilize the mud flaps, stopping them from rocking and moving around.