Towing (246)

This bolt will fit in the 10', 12, and 14' TrueNorth utility gates.  Dimensions: 5.4” long (5 13/32”) and has a diameter of .75” (3/4”) 1x Bolt 1x Nut 1x Washer

Capacity: 25KOuter Diameter: 4.5" Round Tube, 4 Height SettingsPipe Thickness: .24"Finish: Bare SteelIncludes: 3/4" Locking Pin and 2 set screws

Capacity: 25KOuter Diameter: 4.5" Square Tube, 4 Height SettingsPipe Thickness: .24"Finish: Bare SteelIncludes: 3/4" Locking Pin and 1 set screws

Capacity: 30KOuter Diameter: 4.5" Square Tube, 4 Height SettingsPipe Thickness: .--Finish: Bare SteelIncludes: 3/4" Locking Pin and -- set screws

2 5/16" Adjustable Gooseneck CouplerCapacity: 25KOuter Diameter: 4.5" Round TubePipe Thickness: .24"Finish: Bare SteelIncludes: 3/4" Locking Pin and 2 set screws

Capacity: 30KLift: 7"Outer Diameter: 4.5", RoundPipe Thickness: .24"Ball Size: 2-5/16"Finish: Bare SteelIncludes: Top wind crank and 1 set screw

  This item is in new condition, the packaging is damaged.   Eliminates the need to ever grease your coupler or ball! The ball is made of plated steel and features a 1/8" thick cap that reduces wear and tear on the ball and coupler. The 1/8" nylon cap comes with a lifetime replacement warranty! Greaseless HardBall -never have to lubricate ball or coupler! Plated Steel ball with 1/8" Nylon Cap. Towing capacity: 5,000 lbs. Fits AlumiStinger and all traditional ball mounts with 1" hole. Meets V5 and SAE J684 certifications. Includes wrench flats for easy installation. Lifetime replacement warranty on nylon cap!

Fits most 4, 5 and 6 lug wheels - up to 16-1/2-Inch. Provides 4-3/4-Inch lift and over 7-Inch of offset to mount tire up and out of the way. Zinc-plated to resist corrosion. Fits trailer tongue up to 3-Inch wide by 5-Inch high Easy bolt-on installation, no cutting or drilling required. All mounting hardware and instructions included.

Weather-resistant dust cover features a rubber insert to seal out moisture Spring-loaded cover also helps keep connector clean when not in use Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector Simple plug-and-play design eliminates the need for cutting or splicing 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power A CURT connector provides a reliable connection for your trailer wiring, using an industry-standard format, such as a 4-way flat, 6-way round or 7-way RV blade. They can be used to install new wiring on a vehicle or trailer or as replacement connectors for existing wiring. This particular connector is a 7-way RV blade socket and is designed to mount on the vehicle-side of the connection, to accept a trailer wiring plug. It features a USCAR base to connect to a standard USCAR plug (see application info to verify fitment with your vehicle). Once plugged into the USCAR socket, it provides a connection for the taillights, turn signals, brake lights, backup or reverse lights, electric trailer brakes and a 12-volt battery. It also provides a connection for the ground wire. This trailer wiring connector is built to withstand the elements. It is constructed from durable black molded plastic to be impervious to rust, and it features a dust cap with a spring mechanism to keep out rain, salt, grime and dirt when the connector is not in use.

Please note: Delivery may take 1-2 weeks from the order date. Dual Cushion Hitch: Dual Cushioned Raised ball mount with a 2″ or 2-5/16″ trailer ball. Shocker Absorbing Design: Pivoting design with dual bump cushions absorbs the road shock & reduces the tendency to sway. Flip Around Design: Hitch can be flipped around for more drop or rise. 7 Adjustment Holes: 5″ of Rise to 3″ of Drop. Great for pickups, SUV’s & UTV’s. Heavy Duty Capacity: 12,000 lbs towing capacity and a 1,200 lbs tongue weight. Premium Powder-Coat Finish: HD Premium powder coated finish of base frame Great All Around Use: Works great on pickup trucks, vans, suvs, cuvs, minivans, RV’s & motorhomes. 2 Hitch Pin Holes in Shank: For more length adjustability and it also works with hitch mount tow flaps or Shocker hitch tow flaps. Available for 3 Receiver Sizes: Choose either a 2″, 2-1/2″ or 3″ receiver hitch shank. 10+ Ball Mount Attachment Options: Available and sold separately. Works with all our ball mount attachments; Combo, sway, clevis, drawbar, drop raise ball mounts and more. Includes complete adjustable Shocker Impact Max cushioned base frame with built-in bump cushions, adjustable raised ball mount & 2 d-handle ball mount pins with clips. Safety Notice: The Shocker Hitch is a heavy-duty unit that in most cases exceeds factory towing weight capacities, therefore it’s important you read and follow the tongue & tow weight recommendations of the truck it is mounted on, the trailer coupler rating & the ratings of the trailer you are towing. Manufactured by Shocker Hitch® USA in Arthur, ND. Bolt-on 2″ Ball is 10,000 lbs GTW & 1,000 lbs TW / 2-5/16″ Ball is 20,000 lbs GTW & 2,000 lbs TW. The Shocker Impact cushioned with raised ball mount comes with a 2″ or 2-5/16″ hitch ball is designed for towing campers, boats, contractor equipment trailers, fish houses, skid steer trailers and more. It cushions your towing experience from the road shock and bumps. The dual bump shocker absorbing cushion design is rated up to 12,000 lbs. Featuring 5″ of rise to 3″ of drop. 12,000 lbs tow rating capacity and 1,200 lbs tongue weight. Use this Shocker Impact adjustable cushion ball mount however you need to for tons of versatility. The dual action bump cushions also help reduce the tendency of sway by absorbing the bangs and tugs of the road. Works great on pickup trucks, vans, SUVs, cuvs, and minivans. This is also the perfect cushioned ball mount for an RV or motorhome. Shocker Impact cushioned hitch ball mount provides the ultimate versatility and a smoother towing experience than a solid ball mount. The Impact ball mount has built-in adjustability maximum versatility with 7 adjustment holes for your all towing needs. This Shocker Impact cushioned adjustable ball mount attaches by sliding into a standard receiver tube. The shank has 2 holes for the hitch pin so you can adjust the length and it also works with hitch-mounted mud flaps. The receiver shank has 2 hitch pin holes for adjustability but it will work with hitch mud towing mud flaps or with the Shocker hitch towing flap system. Tons of Attachments: We offer a wide variety of our ball mount attachments; standard mounts, drop ball mounts, clevis mounts, drawbar mounts, cushioned drawbar mounts, pintle hook attachments, raised mounts and combo multi-ball mounts.

Coupler Lock, TL-70 for King Pins.

Used on axles with 1/2" studs

Used on majority of PJ Trailers 7,000lb and 8,000lb Axle Applications.

Lynch pin 7/16"

20 foot cord with 4-way flat plug allows for plug-and-go convenience Non-scratch magnetic base Includes durable storage case Auxiliary magnetic towing light kit

Used on the standard deckover trailers Width: 22" Length: 30" Thickness: ¼ "

Used on the Low-Pro Deck over trailers Width: 22" Length: 23" 1/4" thick

The adjustable Mudflap Rock Guard System is engineered to fit a 2" hitch, enabling effortless installation. It fits any size truck, effectively shielding your vehicle from dust, rocks, gravel, and debris, avoiding dings and scratches. The Mudflap Rock Guard System offers flexibility with its adjustable width and height. Its overall width ranges from 67-¼ inches to 97 inches, accommodating various vehicle sizes. The fender height is easily customizable using the swivel arm. Moreover, the 24"x24" flaps can be trimmed to match any vehicle type. Designed for durability, the Mudflap Rock Guard System hub is made from forged aluminum, and heat-treated for optimum strength, longer lifespan, and robust corrosion resistance. Its heavy-duty mudguards, with a thickness of 3/8 inch, are highly resistant to wear, ensuring reliable performance over extended periods.