New products – Page 4 – PJ Trailers Canada, Inc.

PJ Trailers Hasp CamDoor Latch - Dump Door # 180110 $7.99

Hasp CamDoor Latch - Dump Door Dimensions:Overall length: 5.5"Overall width: 1" Center to center hole: 4.27"Accommodates a bar up to 1.37" wide by .35" thick.

Hopkins 48" Easy Pull 4-Way Flat Harness # 38134 $9.99

Easy pull 4-way flat wiring harnesses 48" Long

True North Trailers 64" 4-Way Flat Harness # VXWL405 $37.62

Replacement wiring harness for True North trailers with 4-pin wiring harnesses. 64" Long

Sold out

PJ Trailers Ramp Support Rail for CH Rear # 160494 $65.50

Ramp Support Rail for CH Rear

True North Trailers Electric Brake Kit # TNT-BKKIT $449.95

This Kit includes all the parts needed to put electric brakes on any single-axle True North Trailer. Kit Includes:LH Side 10" Brake Assembly - #112100 x 1RH Side 10" Brake Assembly - #112101 x 1Drum Hub Kit (includes bearings and races) - #111045/4.5 x 2Breakaway Kit - #112245 x 1Junction Box - #J-JB x 17 Way Plug - #CU56612 x 112' of 2 Wire Cable - #82-5511 x 12(ft)

Ironworks Industries Replacement Rod and Nut for Ironworks Ind., Direct Weld Jacks - 25K # IW12000-RODNUT1 from $32.50

Overall dimensions of rod: 18" long x 1" diameter Replaces the threaded rod and lift nut from your Ironworks Ind. square, direct-weld jacks with 25,000-lb capacity Designed for25K Ironworks Industries Jacks Includes: 1 threaded rod 1 Lift nut

Sold out

Ironworks Industries Replacement Rod and Nut for Ironworks Ind., Direct Weld Jacks - 12K # IW12000-RODNUT2 $68.50

Overall dimensions of rod: 17-1/2" long x 1" diameter Replaces the threaded rod and lift nut from your Ironworks Ind. square, direct-weld jacks with 12,000-lb capacity Designed for12K Ironworks Industries Jacks Includes: 1 threaded rod 1 Lift nut

Sold out

Caliber BunkWrap Roll with Endcaps # CP23050 $64.95

2×4 Gray 16′ Roll w/4 Endcaps & Stainless Hardware Renew Your Old, Shaggy, Carpeted Bunks with our New, Patented, Permanent Solution! Caliber BunkWrap eliminates your need to Re-Carpet every year due to use and wear. As a Lifetime replacement for your old carpet, this innovative product is beneficial for both the environment, and you! Replace your old ripped carpeted bunks with a smooth permanent solution. Less strain on arms, ropes, pulleys, and bow eyes Helps reduce the spread of invasive species Eliminate Electrolysis breakdown of Aluminum Great for Boat, Pontoon, and PWC, Lifts and Trailers End Caps and All Stainless hardware included Bunk Wrap mounts directly over bare wood NOT to be installed over carpet DISCLAIMER: BunkWrap is designed for raw aluminum boats, pontoons, and watercraft boat lifts. BunkWrap is not designed, or recommended, for gel-coat, fiberglass, or painted aluminum hulls. Although, many people use it for this application, it is at their own risk. If you are concerned about scratching, or scuffing, the hull of your boat, use Caliber Slydz-On on your bunk carpet as a friction-reducing alternative. See instructions inside, or visit www.caliberproductsinc.com for additional product information.

Sold out

Caliber Marine Slides - 10 Pack # CP23010 from $32.95

Trailer Bunk Slides Makes launching your boat or watercraft easy, slides effortlessly off bunks and into the water. The new unique profile provides extra cushioning between the boat and trailer bunks. Washout channels flush sand and debris off of the slides and away from the hull. Safer unloading and loading because of reduced friction and stress by 35% on the trailer cranking mechanisms, ropes and hull bow hooks. Allows you to unload and load your boat or watercraft in shallower water. Fast and simple installation for both horizontal and vertical bunks. Made from a low-friction composite which is impervious to sun, weather and salt water. Excellent for use on workstations, lifts, boat and watercraft dollies.

Caliber MX Pro - Dirt Bike Ramp # CP13565 $269.99

The Industry’s most innovative, Ramp design for MX! 600 lbs. LOAD RATING. ONE RAMP DOES IT ALL! LowPro GripGlides installed for safe loading in any condition (sold separately – see page. LowPro Grip Glides for details) Retrax Strap included with ramp for safety and security while loading and unloading (sold separately – see page. Retrax Straps for details) Rubber feet and fingers keep ramp in a secure position during use Integrated pop socket keeps ramp closed for easy transport and handling Folding design for compact storage Ramp Capacity: 600 lbs. Ramp Weight: 22 lbs. Ramp Dimensions: OPEN – 12.5” x 89” x 2” CLOSED – 12.5” x 47” x 5.5”

Caliber ATVs & Snowmobiles RampPro 2.0 # CP13527 $972.99

ONE RAMP DOES IT ALL!The most innovative ramp designed for ATVs, Snowmobiles, and some UTVs! Accommodates snowmobile ski stances down to 30” LowPro GripGlides provide traction for ATVs, UTVs, and walking Retrax strap to easily secure the ramp to your vehicle Ramp length provides a safe, effective, and comfortable loading angle Maximum recommended load surface height: 45 inches Maximum loaded vehicle width: 52 inches Rated capacity: 1,500 lbs. Always use safety straps attached to both the transport vehicle and ramp Additional retractable straps available Always load or unload on a solid, level, and stable surface with the transport vehicle in park, parking brake on, and engine off WARNING:1,500 lb. – Rating does not apply when ramp is disassembled.

Sold out

Ironworks Industries Replacement Top Cap for 12K Jacks # IWLID $6.95

Replacement top cap for 12,000 lbs Ironworks Industries Jacks.

Sold out

Ironworks Industries Replacement Gears & Pins for 12K Jack # IW12000-GEARSET $29.99

Replacement gear set for 12,000 lbs Ironworks Industries Jacks.

-19% sale

Andersen USED/Final Sale - 8" drop/rise, 2" ball, 3", 4", 5" & 6" brackets - No-S... # USED AND3326 $665.00
$815.99

*THIS KIT IS FINAL SALE. No returns, refunds or exchanges.*All parts are included.Minor wear or cosmetic damages are as shown. Not eligible for warranty. Andersen 'No-Sway' Weight Distribution Hitch – 4" drop/rise, 2-5/16" ball, universal frame brackets (3", 4", 5" & 6") - 2" Receiver There is a better way –and this is it! Our silent, 'No-Sway,' 'No-Bounce' Weight Distribution Hitch doesn't just raise the bar, it sets it! Combining modern materials, technology and innovation, it’s the simplest, quietest, and most advanced weight distribution hitch on the road today. This is a first in the industry giving trailer owners the best anti-sway option AND the only true Motion-Dampening system (anti-bounce) around. Owners can't believe how smooth and quiet the ride is! Look at these advantages: Unparalleled Sway Control that self-adjusts So quiet you won't even know it's there! Patented True Motion-Dampening™ system -drastically reduces bounce Weighs under 60lbs!! 2-5/16" ball included –no extras to buy One pin removal from tow vehicle Grease-free system –ball and coupler move as one Easy install –no pry bars needed! Optional 8" drop/rise adjustable shank available (part #3351) Doubles as standard ball mount for towing without weight distribution The smoothest ride around - owners are saying they can't believe it! No problem backing up –unlike many other weight distribution hitches 14,000 lbs GTWR • 1,400 lbs tongue weight What Andersen Weight Distribution kit do I need? See the Andersen Hitches WD Hitch Fitment Guide on the Weight Distribution Installation page for details about finding the right WD Hitch for you.

Sold out

Redneck Single Axle Trailer Fender 11.38" X 35" Poly With Skirt And Step Black # PF11X35B $78.45

Width: 11.38"Length: 35" (45" Overall with Steps).Height: 13"Material: Black Poly

Dexter 7/8" Trailer Slipper Spring Equalizer Bolt 7/8" w/ zerk fitting - 6 Pack # 166074-218.6PK $74.95

6 x Bolt Size: 7/8" x 4-3/4" (166074) 6 x Lock Nut Bolt 7/8" (120218) Capacity: 7K Slipper

Dexter 7/8" Trailer Slipper Spring Equalizer Bolt 7/8" w/ zerk fitting # 166074-120218 $14.75

Bolt Size: 7/8" x 4-3/4" (166074) Lock Nut Bolt 7/8" (120218) Capacity: 7K Slipper

Dexter Bolt Equalizer 7/8"x4.75" 7K # 166074 $7.90

Bolt Size: 7/8" x 4-3/4" Capacity: 7K Slipper Nut for bolt: #120218

Curt Universal Trailer Coupler Lock (Ballistic Nylon) # CU23179 $151.99

Prevents trailer ball from being inserted into the coupler Universal design fits most couplers Built with hardened steel and ballistic grade nylon components Dual-ratchet locking system offers lasting operation Includes two keys for added convenience Limited lifetime warranty (one-year finish, one-year parts) Sometimes a safety pin and coupler latch are just not enough to keep your toys safe. While CURT safety pins and coupler latches are made to keep your coupler securely latched onto your trailer ball, they are no substitute for the locking power provided by a CURT trailer lock. CURT trailer locks are designed to add security to your trailer and towing equipment. Instead of merely retaining the coupler latch mechanism, CURT trailer coupler locks are actually designed to protect your trailer from theft when it is not hitched up to your vehicle. This trailer lock features solid, hardened steel hardware and a ballistic-grade nylon body for a lasting strength and resistance to the elements. The dual-ratcheting locking system easily secures your trailer by inserting into the coupler and taking the place of a trailer ball. This CURT trailer lock is key-operated and features a universal fit to accommodate a variety of couplers. All CURT trailer locks include two keys in every package. Protect your boat, your camper and even your utility trailer the right way with a CURT coupler lock.

True North Trailers 83"x14' UTILITY TRAILER # tnu821431dsfk from $3,899.00

Features Length: 14 ft. (4.26 m.) Width: 83 ft. (2.10 m.) Overall Dimensions: 102 in. x 218 in. GVWR: 2,990 lbs. (1,356 kgs.) GAWR: 3,500 lbs. (1,588 kgs.) Weight: 1,217 lbs. (552 kgs.) Payload Cap.: 1,780 lbs. (807 kgs.) Axle Qty.: 1 Axle Type: 3,500 lbs. (1,588 kgs.) Brake Type: Idler Suspension: 4-Leaf Springs Tires: ST205 15 in. Tire and Rims Coupler Type: Bumper pull Coupler Spec.: 2 in. A-Frame Coupler with Safety Chains Jack(s): 2,000 lbs. Rated Top Wind Jack Deck: Treated Wood Deck Height: 20 in. (0.5 m.) Ramp/Gate: Fold-In Rear Ramp Gate Specifications The ramp/gate features three positions, ramp mode, gate mode and folded-in. Heavy duty easy-to-use gate latches. The handle makes lowering and picking up the gate/ramp very easy. 2″ Ball welded on the A-Frame coupler, simply pull the trigger latch-up to open the ball socket. Load your equipment safely from either side of the trailer with the sturdy built-in ramps. 5 Bolt steel modular rim with ST205/75 15″ trailer tires.

2 3 4 5 6

Cant find what you are looking for?

We can Help!

TRAILER PARTS & ACCESSORIES

Family owned and operated since 2008

CAN'T FIND WHAT YOU NEED?

Prices May Vary in Store

Please note that the prices listed on our website are subject to potential variations when shopping at our physical retail locations. Factors such as regional pricing, in-store promotions, operational costs, and inventory management may contribute to differences in product pricing. We strive to keep prices competitive and consistent, but we recommend verifying the prices with the specific store you intend to visit. For any inquiries or concerns, please contact our customer support team. Thank you for your understanding and support.

Find anything you need

New products (980)

Cant find what you are looking for?

TRAILER PARTS & ACCESSORIES

CAN'T FIND WHAT YOU NEED?